Be the Best Sensors’ Manufacturer and One Stop Solution Service

Attn:Tara WhatsApp:+86 13951751584

cnc training centre in chennai

by:KJTDQ     2020-04-15
Numerical control training numerical control is also the automatic control of machining tools (
Lathe, drilling tools)
Through computers and 3D printers.
Blank part of NC machine changing material (
Metal, plastic, wood, ceramic or composite)
Meet precise specifications by following programming instructions and not using manual operators.
The NC machine combines the motorized motor tool with the motorized motor platform, which is controlled by the core computer cnc training center according to specific input instructions.
Instructions are passed to the NC machine in the form of a graphical computer
Auxiliary design files that are converted into sequential programs for machine control instructions such as G-
Code, then execute.
In the case of a 3D printer, the part to be printed is \"sliced\" before the instruction (or the program)is generated.
NC is a great progress in machining, and it is a very big improvement.
Type of computer processing that requires manual control, by hand wheel or lever, or by means of a prefabricated pattern guide rail for mechanical control (cams).
In modern CNC systems, the design of mechanical parts and their manufacturing procedures are highly automated.
Use CAD software to define the mechanical dimensions of the part and then translate it into manufacturing instructions by computer
Auxiliary manufacturing (CAM)software.
Conversion result instruction (
Through \"post processor\" software)
Enter the specific commands required for a specific machine to produce components, and then load them into the CNC machine.
Because many different tools may be needed for any particular component-drill bit, saw, etc.
-Modern machines usually combine multiple tools into one \"unit \".
In other installations, many different machines are used with external controllers and people or robot operators who move parts from one machine to another.
In both cases, the series of steps required to produce any part is highly automated and produces parts that closely match the original CAD.
In CNC, when the machine moves in a way that is harmful to the machine, tool or part being processed, a \"collision\" occurs \", sometimes it can cause the tool, accessory fixture, vises and fixture to bend or break, or cause the structural parts to crack or deform by bending the guide rail, breaking the drive screw, or under strain, damage to the cnc training center of Chennai machine itself.
A slight collision may not damage the machine or tool, but may damage the part being processed and therefore must be scrapped.
Many CNC tools do not have an inherent feeling of the absolute position of the table or tool when they are opened.
They have to be \"home\" or \"zero\" manually in order to have any work references, and these restrictions are just to find out where the parts work, and there is no hard movement limit for this mechanism.
It is usually possible to drive the machine outside the physical boundaries of its drive mechanism, resulting in a collision with itself or damage to the drive mechanism.
In addition to the physical limit switch, many machines also realize control parameter limiting the movement of the shaft beyond a certain limit.
However, these parameters can often be changed by the operator.
Many CNC tools know nothing about their working environment.
The machine may have a load sensing system on the spindle and shaft drive, but some do not.
They blindly follow the processing code provided, the operator can detect if the collision is happening or is about to happen, and the operator can manually abort the Activity process.
Machines equipped with load sensors can stop shaft or spindle movement in response to overload conditions, but this does not prevent collisions.
It may only limit the damage caused by the collision.
Some collisions may not overload any shaft or spindle drive.
If the drive system is weaker than the structural integrity of the machine, the drive system will simply push the obstacles and the drive motor will \"slide in place \".
The machine tool may not be able to detect a collision or slip, so, for example, the tool should now be at 210mm on the x-axis, but in fact, at 32mm, it hits the obstacle and keeps sliding.
All subsequent tool movements will turn off 17mm on the x-axis, and all future movements are now invalid, which may result in further collisions with fixtures, vises, or the machine itself.
This is common in open-loop stepping systems, but it is not possible in closed-loop systems unless a mechanical slip occurs between the motor and the drive mechanism.
Instead, in a closed-loop system, the machine will continue to try to move the load until the motor is driven into an over-current state or an error alert for Servo tracking is generated.
Collision detection and avoidance is possible by using an absolute position sensor (
Optical encoder with or with disc)
Verify that motion occurs, or torque sensors or power-
When the machine should move instead of cutting, draw sensors on the drive system to detect abnormal strain, but these are not common parts of most amateur CNC tools.
Instead, most amateur CNC tools rely solely on the assumed accuracy of the stepping motor, which rotates a specific degree in response to a change in the magnetic field.
People usually think that the stepping motor is completely accurate and will not go wrong, so the tool position monitoring only needs to calculate the number of pulses sent to the stepping motor over time.
An alternative approach to step position monitoring is often not available, so it is not possible to perform collision or sliding detection.
The commercial CNC metal machining machine tool adopts closed loop feedback control for the movement of the shaft.
In a closed-loop system, the controller monitors the actual position of each axis with an absolute or incremental encoder.
With the proper control cnc training center programmed by Chennai, this will reduce the likelihood of a crash, however, ensuring that the machine operates in a safe manner still depends on the operator and the programmer.
However, during the period of 2000s and 2010 s, the processing simulation software has matured rapidly, for the entire machine tool envelope (
Includes all shafts, spindles, Chuck, turret, tool rack, tail rack, fixture and stock)
The use of 3D cnc training center for accurate modeling in Chennai physical models allows simulation software to predict fairly accurately whether a cycle will collide.
Although this simulation is not new, its accuracy and market penetration rate are changing dramatically due to advances in computing technology.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...