Nanjing KJT Electric Co,.LTD
Our main products are proximity sensor, photoelectric sensor,speed sensor,wireless sensor and so on.
High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. KJT also offers VRS sensors for general purpose, power output, high resolution, high temperature, and hazardous location applications, as well as low-cost molded versions.
|Product Category:||Speed Sensors|
|Type:||Variable Reluctance Speed (VRS)|
|Output Voltage:||55 V|
|Termination Style:||Wire Leads|
|Maximum Operating Temperature:||+ 107 C|
|Minimum Operating Temperature:||- 40 C|
|Maximum Frequency:||40 kHz|
|Product Type:||Speed Sensors|
|Factory Pack Quantity:||1|
|Unit Weight:||1.081122 oz|
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.