loading

Be the Best Sensors’ Manufacturer and One Stop Solution Service

Attn:Tara Email:kaijite3@kjtsensor.com WhatsApp:+86 13951751584

Home  >  PRODUCTS  >  Speed Sensor  >  Variable Reluctance Speed (VRS) sensors  > 

KJTDQ KJT-3040AN25-LY Industrial VRS Magnetic Speed Sensors Speed Sensors 15.9mm, M16, 70 Vp-p Round, 4.75mm Pole

这里可以自定义设置
KJTDQ KJT-3040AN25-LY Industrial VRS Magnetic Speed Sensors Speed Sensors 15.9mm, M16, 70 Vp-p Round, 4.75mm Pole
Power Output VRS sensors are designed for driving low resistance loads at large air gaps in applications where larger actuators may be used. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine w
B站不支持收货地址
B站不支持库存规格
Trade Terms
FOB
Payment Terms
TT
Delivery Time
10-15 days
Packing
Polybag
MOQ
5
Place of Origin
China
Certificate
CE
参数暂无数据
多属性暂无数据
B站不支持优惠卷
暂无分享
B站不支持产品保障

DESCRIPTION

Power Output VRS sensors are designed for driving low resistance loads at large air gaps in applications where larger actuators may be used. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. KJT also offers VRS sensors for general purpose, high output, high resolution, high temperature and hazardous location applications, as well as low-cost molded versions.

Speed Sensors 15.9mm, M16, 70 Vp-p Round, 4.75mm Pole




Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Leave Your Message inputting...