KJTDQ-F16A-LY - Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/M16x1.5 1.5" Thread

The KJT-F16A-LY series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F16A exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

Features:

• Signal Output: Square Wave signal output from NPN output transistor with internal 2.7 kOhm pull-up resistor, DC-coupled to supply

• Thread Length: 1.5" M16x1.5 thread

• 8-25 DCV Supply Voltage

• 12 mA (without load) maximum current consumption

• 0-15 kHz Frequency Range

• Housing: M16x1.5, tightening torque: max. 35 Nm

• Connection: Connector, M12x1 thread, 4 pins, black

• Operating Temperature: -104-257°F (-40-125°C)

• Protection: IP68 (Sensor) / IP67 (Cable)

• Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Additional Info

• Digital Magnetic & Hall Effect Sensors

• Connector