Hall Effect Zero-Speed Sensor

KJT-SHN7.GP00.SC-LY 1-Channel Hall M18 Brass Speed Sensors

KJT-SHG31.GE00.SB-LY Channel Hall M8 Speed Sensor with temperature detection

HALL EFFCT 6mA 24VDC M12-1 12mm CircCnctr

The LCZ Series Hall-effect Zero Speed Sensors provide a durable, cost-effective solution in most harsh environments. The sensor is available in 9,5 mm [3/8 in/0.375 in] and 15,9 mm [5/8 in/0.625 in] diameters, in both 50,8 mm [2.00 in] and 76,2 mm [3.00 in] lengths. The stainless steel package is simple to install and adjust. It does not require rotational orientation

The GS1005-GS1007 series gear tooth speed sensors are Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provide a sinking current output.

Description The GS101201-GS101202 series gear tooth speed sensors are Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provide a sinking output current.

KJT-SNDH-T4P-G02-LY Speed Sensors 45mm Barrel, 4.5Vdc 1 Hz to 15kHz,OpFreQ

The GS1005-GS1007 series gear tooth speed sensors are Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provide a sinking current output.

KJT's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor 32347440 Issue A TABLE 1. ELECTRICAL SPECIFICATIONS CHARACTERISTIC CONDITION/COMMENT PARAMETER SNG-SPRF-002 SNG-SPRD-002 SNG-SPSC-001 SNG-SPRC-001 SNG-SPRD-003 SNG-SPRC-002 SNG-SPRD-004 SNG-SPRC-003 Supply voltage regulated supply and 12 V battery ISO 16750-2 4.5 V to 24 V - - 8 V to 16 V - 4.8 V to 16 V - 4.8 V to 24 V Supply current - 20 mA max. 15 mA Reverse voltage protection - ISO 16750-2 -24 V - - -14 Vdc Over voltage protection - ISO 16750-2 26.5 V - - 26 V Short circuit protection - ISO 16750-2 16 V - - 16 V Load dump ISO 16750-2:2012 11 01 (US* = 40 V, UA 13.5 ±0.5 V) 5b - - - Insulation resistance ISO 16750-2:2012>10 MOhm at 500 Vdc - - - positioned at the

Description The GS1023 series gear tooth speed sensors are Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing is needed. The single Hall design is immune to alignment issues allowing unlimited mounting positions. They provide a sinking current output.

The SNDH-H Series Hall-Effect Speed Sensors use a magnetically biased Hall-effect integrated circuit to accurately sense movement of ferrous metal targets. The specially designed IC (integrated circuit) and a permanent magnet are sealed in rugged, probe-type packages.

The GS101205 series gear tooth speed sensors are Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing is needed. The single Hall design is immune to alignment issues allowing unlimited mounting positions. They provide a sinking current output.

The LCZ Series Hall-effect Zero Speed Sensors provide a durable, cost-effective solution in most harsh environments. The sensor is available in 9,5 mm [3/8 in/0.375 in] and 15,9 mm [5/8 in/0.625 in] diameters, in both 50,8 mm [2.00 in] and 76,2 mm [3.00 in] lengths. The stainless steel package is simple to install and adjust. It does not require rotational orientation.

The LCZ Series Hall-effect Zero Speed Sensors provide a durable, cost-effective solution in most harsh environments. The sensor is available in 9,5 mm [3/8 in/0.375 in] and 15,9 mm [5/8 in/0.625 in] diameters, in both 50,8 mm [2.00 in] and 76,2 mm [3.00 in] lengths. The stainless steel package is simple to install and adjust. It does not require rotational orientation.

The KJT-Y12AD series Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds and direction signals. The Y12AD exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The internal 2-channel structure means that the sensor must be oriented. The sensors have a special orientation sleeve with pins for ease of installation. The sensors can also be used as proximity switches.

The KJT-F58S40-LY series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F58S40 exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

The KJT-F58S25 series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F58S25 exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

The KJT F58S series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F58S exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

The KJT-F58A40-LY series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F58A40 exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.