Laser hot and cold metal sensor

Hot metal detectors are mainly used in metallurgical industrial systems. They detect red-hot high-temperature workpieces, determine the movement position of the workpieces, and output a control switch signal.

HMD hot metal detector is mainly used in metallurgical industry system. It detects high temperature workpieces, determines the movement position of the workpieces, and outputs a control switch signal.

Cold metal detectors are mainly used in metallurgical production lines. They detect the position of the workpiece and output a switch control signal (contact or level signal) to participate in automatic control. Cold metal detectors can be divided into two types according to the light source: visible red light type cold metal detectors and infrared light type cold metal detectors. Cold metal detectors can be divided into feedback reflection type (R), through-beam type (T), and direct reflection type (D) according to the detection form.

Cold metal detectors are mainly used in metallurgical production lines. They detect the position of the workpiece and output a switch control signal (contact or level signal) to participate in automatic control. Cold metal detectors can be divided into two types according to the light source: visible red light type cold metal detectors and infrared light type cold metal detectors. Cold metal detectors can be divided into feedback reflection type (R), through-beam type (T), and direct reflection type (D) according to the detection form.

-Laser hot metal detector is easy to use; -Power When the sensor is powered normally, the green light is always on; -Signal When the detection target distance is within the set range, the blue light is always on; -Alarm When there is an operation error or the sensor is not working properly, the red light is always on; - The red indicator laser is used to aim at the target. After power is turned on, the red light will remain on for 20 minutes and then automatically turn off. The red light can be re-lit through the debug port