KJTDQ-Y12AD-LY - Dual-Channel Hall Effect Speed Sensor Square Wave Signal & DC Signal Outputs w/M12x1 1.5"; Thread

The KJT-Y12AD series Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds and direction signals. The Y12AD exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The internal 2-channel structure means that the sensor must be oriented. The sensors have a special orientation sleeve with pins for ease of installation. The sensors can also be used as proximity switches.

Features:

• Signal Output: Two Output Channels - Square Wave Signal indicating frequency and DC Signal indication direction, both from NPN open collector outputs with internal 10 kOhm pull-up resistor

• Thread Length: 1.5" M12x1 thread

• 11-32 DCV Supply Voltage, protected against reverse polarity

• 20 mA (without load) maximum current consumption

• 0-15 kHz Frequency Range

• Housing: M12x1, tightening torque: max. 12 Nm

• Connection: Connector, M12x1 thread, 4 pins, black

• Operating Temperature: -104-257°F (-40-125°C)

• Protection: IP68 (Sensor) / IP67 (Cable)

• Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

Additional Info

• Digital Magnetic & Hall Effect Sensors

• Connector