Basic series 1 mm flush

KJT-SHP7.GR10.SC-LY 1-Channel Hall M18 Stainless Steel Speed Sensors

KJT's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor 32347440 Issue A TABLE 1. ELECTRICAL SPECIFICATIONS CHARACTERISTIC CONDITION/COMMENT PARAMETER SNG-SPRF-002 SNG-SPRD-002 SNG-SPSC-001 SNG-SPRC-001 SNG-SPRD-003 SNG-SPRC-002 SNG-SPRD-004 SNG-SPRC-003 Supply voltage regulated supply and 12 V battery ISO 16750-2 4.5 V to 24 V - - 8 V to 16 V - 4.8 V to 16 V - 4.8 V to 24 V Supply current - 20 mA max. 15 mA Reverse voltage protection - ISO 16750-2 -24 V - - -14 Vdc Over voltage protection - ISO 16750-2 26.5 V - - 26 V Short circuit protection - ISO 16750-2 16 V - - 16 V Load dump ISO 16750-2:2012 11 01 (US* = 40 V, UA 13.5 ±0.5 V) 5b - - - Insulation resistance ISO 16750-2:2012 >10 MOhm at 500 Vdc - - - positioned at the

The KJT-F16A25 series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F16A25 exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.