KJT-1GM1000-LY Speed Sensors COMM SOLID STATE/MAG

Power supply voltage：8-30VDC Current consumption：Suitable for large 15mA Output signal Vo：Push-pull output Imax=+/-20mA,Ulow<2.5V,Uhigh>Usupply-3.5V Frequency Range：0-15KHz Air gap：Module1：0.2to0.6mmm；Module2：0.2to1.5mm Earthquake resistance：5gn（5…2000Hz范围内）

Power supply voltage：8-30VDC Current consumption：15mA Output signal Vo：push-pull output Imax=+/-20mA,Ulow<2.5V,Uhigh>Usupply-3.5V Frequency range：0-20KHz Air gap：Module0.5：0.1to0.3mm；Module1：0.1to1.5mm；Module2：0.1to2.0mm Shock resistance：5gn（5…2000Hzrange）

Product Series：Piezoelectric vibration speed sensor KJ90T90HY Protection level：IP65 Measuring range (effective value)：0~20mm/sec Supply voltage：15VDC~36VDC output method：5/8-24 Four core socket ambient temperature：-40°C~+85C Installation method：1/4-28 connecting cables：MIL four-core connecting cable 3 meters

1-Channel Hall M18 Stainless Steel Speed Sensors

KJT-SD100203-LY Speed Sensors 5 - 24VDC Sink

KJT-ZS-00434-01-LY Speed Sensors M12,2KHz, 10mA,ECKO Stainless Steel

The KJT-E16A25-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

The KJT-E16A-LYseries Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

The KJT-E12A-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

KJT D12P series Differential Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. They exhibit a dynamic function, whereby pulse generation down to 5 Hz is guaranteed. The sensor must be oriented with respect to the pole wheel as shown in the dimensional drawing (see spec sheet below).

The KJT-D12A-LY series Differential Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The D12A exhibits a static function, whereby pulse generation down to 5 Hz is guaranteed. D12A speed sensor

KJTDQ speed sensor EV58AM25 VRS Sensor w/Amplifier - Square Wave Signal Output from NPN w/5/8-18 UNF-2A 2.5" Thread