Be the Best Sensors’ Manufacturer and One Stop Solution Service

Attn:Tara Email:kaijite3@kjtsensor.com WhatsApp:+86 13951751584
    Home  >  PRODUCTS  >  Speed Sensor  > 

    KJT-E16A25-LY - VRS Sensor w/M16x1.5 2.5" Thread

    这里可以自定义设置
    KJT-E16A25-LY - VRS Sensor w/M16x1.5 2.5" Thread
    The KJT-E16A25-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.
    B站不支持收货地址
    B站不支持库存规格
    Trade Terms
    FOB
    Payment Terms
    TT
    Delivery Time
    7-15 DAYS
    Packing
    POLYBAG
    MOQ
    5
    Place of Origin
    China
    Certificate
    CE
    参数暂无数据
    多属性暂无数据
    B站不支持优惠卷
    暂无分享
    B站不支持产品保障

    Features:

    • Signal Output: the signal frequency is proportional to the target speed

    • Thread Length: 2.5" M16x1.5 thread

    • 0-20 kHz Frequency Range

    • Housing: M16x1.5, tightening torque: max. 35 Nm

    • Connection: Connector, M12x1 thread, 4 pins, black

    • Coil Inductance: 170 mH +/-10% at 1 kHz

    • Coil Resistance: 850 Ohm +/-10%

    • Coil Magnet Polarity: North pole towards front face

    • Operating Temperature: -104-257°F (-40-125°C)

    • Protection: IP68 (Sensor) / IP67 (Cable)

    • Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

    Additional Info

    • VRS Sensors

    • Connector


    Product Message
    KJT-CS12GW type high temperature resistant speed sensor
    KJT-CS12GW type high temperature resistant speed sensor
    Power supply voltage：8-30VDC Current consumption：Suitable for large 15mA Output signal Vo：Push-pull output Imax=+/-20mA,Ulow<2.5V,Uhigh>Usupply-3.5V Frequency Range：0-15KHz Air gap：Module1：0.2to0.6mmm；Module2：0.2to1.5mm Earthquake resistance：5gn（5…2000Hz范围内）
    DSD1205.21ATV speed sensor
    DSD1205.21ATV speed sensor
    Power supply voltage：8-30VDC Current consumption：15mA Output signal Vo：push-pull output Imax=+/-20mA,Ulow<2.5V,Uhigh>Usupply-3.5V Frequency range：0-20KHz Air gap：Module0.5：0.1to0.3mm；Module1：0.1to1.5mm；Module2：0.1to2.0mm Shock resistance：5gn（5…2000Hzrange）
    Piezoelectric vibration speed sensor KJ90T90HY
    Piezoelectric vibration speed sensor KJ90T90HY
    Product Series：Piezoelectric vibration speed sensor KJ90T90HY Protection level：IP65 Measuring range (effective value)：0~20mm/sec Supply voltage：15VDC~36VDC output method：5/8-24 Four core socket ambient temperature：-40°C~+85C Installation method：1/4-28 connecting cables：MIL four-core connecting cable 3 meters
    KJT-SHN10.GR17.E1-LY 1-Channel Hall M18 Stainless Steel Speed Sensors
    KJT-SHN10.GR17.E1-LY 1-Channel Hall M18 Stainless Steel Speed Sensors
    1-Channel Hall M18 Stainless Steel Speed Sensors
    KJT-1GM1000-LY Speed Sensors COMM SOLID STATE/MAG
    KJT-1GM1000-LY Speed Sensors COMM SOLID STATE/MAG
    Speed sensor
    KJT-SD100203-LY Speed Sensors 5 - 24VDC Sink
    KJT-SD100203-LY Speed Sensors 5 - 24VDC Sink
    KJT-SD100203-LY Speed Sensors 5 - 24VDC Sink
    M12 Gear Speed Sensor for Motor Speed Sensor
    M12 Gear Speed Sensor for Motor Speed Sensor
    KJT-ZS-00434-01-LY Speed Sensors M12,2KHz, 10mA,ECKO Stainless Steel
    KJT-ZS-00434-01-LY Speed Sensors M12,2KHz, 10mA,ECKO Stainless Steel
    KJT-ZS-00434-01-LY Speed Sensors M12,2KHz, 10mA,ECKO Stainless Steel
    KJT- E16A40-LY - VRS Sensor w/M16x1.5 4.0
    KJT- E16A40-LY - VRS Sensor w/M16x1.5 4.0" Thread
    KJT-E16A-LY - VRS Sensor w/M16x1.5 1.5
    KJT-E16A-LY - VRS Sensor w/M16x1.5 1.5" Thread
    The KJT-E16A-LYseries Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.
    KJT- E12S - VRS Sensor w/M12x1 2.0
    KJT- E12S - VRS Sensor w/M12x1 2.0" Thread & 39" Leads speed sensor
    KJT variable reluctance speed sensor KJT-E12A-LY - VRS Sensor w/M12x1 1.5
    KJT variable reluctance speed sensor KJT-E12A-LY - VRS Sensor w/M12x1 1.5" Thread
    The KJT-E12A-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.
    KJT-D12P-DifferentialHallEffectSpeedSensor-SquareWaveSignalOutputfromPush-PullStagew/M12x11.0
    KJT-D12P-DifferentialHallEffectSpeedSensor-SquareWaveSignalOutputfromPush-PullStagew/M12x11.0"Thread
    KJT D12P series Differential Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. They exhibit a dynamic function, whereby pulse generation down to 5 Hz is guaranteed. The sensor must be oriented with respect to the pole wheel as shown in the dimensional drawing (see spec sheet below).
    KJT-D12A-LY - Differential Hall Effect Speed Sensor - Square Wave Signal Output from Push-Pull Stage w/M12x1 1.0
    KJT-D12A-LY - Differential Hall Effect Speed Sensor - Square Wave Signal Output from Push-Pull Stage w/M12x1 1.0" Thread D12A speed sensor
    The KJT-D12A-LY series Differential Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The D12A exhibits a static function, whereby pulse generation down to 5 Hz is guaranteed. D12A speed sensor
    KJTDQ speed sensor EV58AM25 VRS Sensor w/Amplifier - Square Wave Signal Output from NPN w/5/8-18 UNF-2A 2.5
    KJTDQ speed sensor EV58AM25 VRS Sensor w/Amplifier - Square Wave Signal Output from NPN w/5/8-18 UNF-2A 2.5" Thread
    KJTDQ speed sensor EV58AM25 VRS Sensor w/Amplifier - Square Wave Signal Output from NPN w/5/8-18 UNF-2A 2.5" Thread
    M12 Gear Tooth Speed Sensor Inductive Speed Sensor
    M12 Gear Tooth Speed Sensor Inductive Speed Sensor

     

     

    Nanjing KJT Electric Co,.LTD

    About us

    Contact Us

    Contact Person : Tara
    Tel : +86 025 65019201
    E-mail : kaijite3@kjtsensor.com
    Address :Haoyue science and technology park, No.1 Fangyuanzhong Road,Jiangning District,Nanjing City,
    Jiangsu Province, China.211102
    WHATSAPP：+86 13951751584
    SKYPE :+86 13951751584
    South east Asia office：48/14 Ratchadaphisek20, 
     Huaikwang, BKK 10310 .

     

    Sitemap

    Copyright © 2019 Nanjing KJT Electric CO.,LTD | All Rights Reserved Design

    Get This APP
    Chat Online 编辑模式下无法使用
    Leave Your Message inputting...