Be the Best Sensors’ Manufacturer and One Stop Solution Service

Attn:Tara Email:kaijite3@kjtsensor.com WhatsApp:+86 13951751584
    Home  >  PRODUCTS  > 

    KJT-E16A-LY - VRS Sensor w/M16x1.5 1.5" Thread

    KJT-E16A-LY - VRS Sensor w/M16x1.5 1.5

    KJT-E16A-LY - VRS Sensor w/M16x1.5 1.5
    • KJT-E16A-LY - VRS Sensor w/M16x1.5 1.5

    KJT-E16A-LY - VRS Sensor w/M16x1.5 1.5" Thread

    Price
    Get Latest Price
    Get the latest price
    Quantity Needed：
    Pieces
    E-mail：

    Features:

    • Signal Output: the signal frequency is proportional to the target speed

    • Thread Length: 1.5" M16x1.5 thread

    • 0-20 kHz Frequency Range

    • Housing: M16x1.5, tightening torque: max. 35 Nm

    • Connection: Connector, M12x1 thread, 4 pins, black

    • Coil Inductance: 170 mH +/-10% at 1 kHz

    • Coil Resistance: 850 Ohm +/-10%

    • Coil Magnet Polarity: North pole towards front face

    • Operating Temperature: -104-257°F (-40-125°C)

    • Protection: IP68 (Sensor) / IP67 (Cable)

    • Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)

    Additional Info

    • VRS Sensors

    • Connector


    Product Message
    Inductive sensor equivalent to NBN15-30GM50-E3-T-V1
    Inductive sensor equivalent to NBN15-30GM50-E3-T-V1
    Extended temperature range 15 mm non-flush
    Inductive sensor equivalent to NBB1-5GM30-E0-0,5M-Y248061
    Inductive sensor equivalent to NBB1-5GM30-E0-0,5M-Y248061
    Basic series 1 mm flush
    Inductive sensor equivalent to NBB0,8-8GS30-E2-3M-Y217818
    Inductive sensor equivalent to NBB0,8-8GS30-E2-3M-Y217818
    0.8 mm flush Stainless steel housing
    Inductive sensor equivalent to NBB4-12GM30-E2-V3
    Inductive sensor equivalent to NBB4-12GM30-E2-V3
    Increased operating distance 4 mm flush
    Inductive sensor equivalent to NBN5-F7-E2-5M
    Inductive sensor equivalent to NBN5-F7-E2-5M
    5 mm non-flush 3-wire DC
    Inductive sensor equivalent to NJ4-12GM40-E1
    Inductive sensor equivalent to NJ4-12GM40-E1
    4 mm non-flush
    Inductive sensor equivalent to NJ1,5-8GM40-E2-0,14M-V1
    Inductive sensor equivalent to NJ1,5-8GM40-E2-0,14M-V1
    1.5 mm flush Fixed cable with quick disconnect plug LEDs integrated into the plug to indicate operating status and function
    Inductive sensor equivalent to NJ10-30GK50-E2-5M
    Inductive sensor equivalent to NJ10-30GK50-E2-5M
    Inductive sensor equivalent to NBN25-30GM50-E2-V1
    Inductive sensor equivalent to NBN25-30GM50-E2-V1
    25 mm non-flush Increased operating distance Extended temperature range -40 ... +85 °C Extended operating voltage range Flexible use with versatile mounting opportunities
    Inductive sensor equivalent to NBN12-18GM50-A2-V1
    Inductive sensor equivalent to NBN12-18GM50-A2-V1
    12 mm non-flush Increased operating distance Extended temperature range -40 ... +85 °C Extended operating voltage range Flexible use with versatile mounting opportunitie
    Inductive sensor equivalent to NBB5-18GM40-Z0
    Inductive sensor equivalent to NBB5-18GM40-Z0
    5 mm flush 2-wire DC
    Inductive sensor equivalent to NBB5-18GM40-Z0-V1
    Inductive sensor equivalent to NBB5-18GM40-Z0-V1
    5 mm flush Extended temperature range 2-wire DC
    Inductive sensor equivalent to NBB20-U4-A2
    Inductive sensor equivalent to NBB20-U4-A2
    Sensor head bidirectional and rotatable 20 mm flush 4-wire DC 4 LEDs indicator for 360° visibility
    Inductive sensor equivalent to NBB20-U1-UU
    Inductive sensor equivalent to NBB20-U1-UU
    Sensor head bidirectional and rotatable NO/NC selectable Comfort series
    Inductive sensor equivalent to NBB20-L2M-A2-V1
    Inductive sensor equivalent to NBB20-L2M-A2-V1
    Sensor head bidirectional and rotatable 20 mm flush 4-wire DC 4-way LED indicator
    Inductive sensor equivalent to NBB2-8GM40-E2-V3
    Inductive sensor equivalent to NBB2-8GM40-E2-V3
    2 mm flush Increased operating distance Extended temperature range -40 ... +85 °C
    Inductive sensor equivalent to NBB15-30GM30-E2-V1
    Inductive sensor equivalent to NBB15-30GM30-E2-V1
    15 mm flush Increased operating distance Extended temperature range -40 ... +85 °C Extended operating voltage range Flexible use with versatile mounting opportunities
    Inductive sensor equivalent to NBB0,8-5GM25-E2
    Inductive sensor equivalent to NBB0,8-5GM25-E2
    Basic series 0.8 mm flush
    Inductive sensor equivalent to NBN8-18GM50-E2-T
    Inductive sensor equivalent to NBN8-18GM50-E2-T
    Extended temperature range 8 mm non-flush
    Inductive sensor equivalent to NBN12-18GM50-E2
    Inductive sensor equivalent to NBN12-18GM50-E2
    12 mm non-flush Increased operating distance Extended temperature range -40 ... +85 °C Extended operating voltage range Flexible use with versatile mounting opportunities
    Inductive sensor equivalent to NBB20-U1-E2
    Inductive sensor equivalent to NBB20-U1-E2
    Sensor head bidirectional and rotatable 20 mm flush 3-wire DC 4 LEDs indicator for 360° visibility
    Inductive sensor equivalent to NBB20-L2-A2-V1
    Inductive sensor equivalent to NBB20-L2-A2-V1
    Sensor head bidirectional and rotatable 4 LEDs indicator for 360° visibility 20 mm flush 4-wire DC Quick mounting bracket
    Inductive sensor φ15mm ring proximity switch
    Inductive sensor φ15mm ring proximity switch
    Kjt ring proximity switch has a variety of sensing apertures of 6mm/10mm/15mm/21mm, with two working principles: dynamic and static. High resolution: Even small steel balls with a diameter of 0.6mm can be reliably detected. The particularly fast response time of 0.2ms can set the pulse extension and sensitivity through the potentiometer. With wires and connectors, normally open and normally closed functions are optional. KJT ring sensors are suitable for detecting metal parts on automated conveying systems, such as spring screws, etc. This sensor has the characteristics of high resolution and short response time.
    Inductive sensor equivalent to NBB2-12GM50-E2
    Inductive sensor equivalent to NBB2-12GM50-E2
    kjt standard proximity switch has reliable action, stable performance, fast frequency response, long application life and strong anti-interference ability. It is widely used in machine tools, metallurgy, chemical industry, textile and printing industries. Product dimensions, cables, and detection distance can all be customized.
    Inductive sensor equivalent to NBB10-30GM50-E2
    Inductive sensor equivalent to NBB10-30GM50-E2
    kjt standard proximity switch has reliable action, stable performance, fast frequency response, long application life and strong anti-interference ability. It is widely used in machine tools, metallurgy, chemical industry, textile and printing industries. Product dimensions, cables, and detection distance can all be customized.
    Inductive sensor equivalent to NBB1-3M22-E2-0,3M-V3
    Inductive sensor equivalent to NBB1-3M22-E2-0,3M-V3
    Kaijit ultra-small proximity switch, micro integrated circuit metal detector. Specifications: φ3, φ4, M4, M5, φ6.5, M8, etc., can be installed in small and compact spaces, have simple installation, high working precision, and good anti-interference performance. They are suitable for high-precision equipment and micro metal detection.
    Inductive sensor equivalent to NBB1,5-5GM25-E2
    Inductive sensor equivalent to NBB1,5-5GM25-E2
    All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
    Inductive sensor equivalent to NBB0,8-5GM25-E2
    Inductive sensor equivalent to NBB0,8-5GM25-E2
    Kaijit ultra-small proximity switch, micro integrated circuit metal detector. Specifications: φ3, φ4, M4, M5, φ6.5, M8, etc., can be installed in small and compact spaces, have simple installation, high working precision, and good anti-interference performance. They are suitable for high-precision equipment and micro metal detection.
    Inductive sensor equivalent to NBB0,8-4M25-E2
    Inductive sensor equivalent to NBB0,8-4M25-E2
    Kaijit ultra-small proximity switch, micro integrated circuit metal detector. Specifications: φ3, φ4, M4, M5, φ6.5, M8, etc., can be installed in small and compact spaces, have simple installation, high working precision, and good anti-interference performance. They are suitable for high-precision equipment and micro metal detection.
    Inductive sensor equivalent to NBB0,8-4M25-E0
    Inductive sensor equivalent to NBB0,8-4M25-E0
    Custom KJT standard proximity sensor ISS 118MM/4NC-8E0-M12 IS 130MM/4NO-25N-M12 IS 130MM/4NO-25N-M12 IS 130MM/2NO-25N-M12 IS 130MM/2NC-25N-M12 Factory From China
    Custom KJT standard proximity sensor ISS 118MM/4NC-8E0-M12 IS 130MM/4NO-25N-M12 IS 130MM/4NO-25N-M12 IS 130MM/2NO-25N-M12 IS 130MM/2NC-25N-M12 Factory From China
    Custom KJT standard proximity sensor ISS 118MM/4NC-8E0-M12 IS 130MM/4NO-25N-M12 IS 130MM/4NO-25N-M12 IS 130MM/2NO-25N-M12 IS 130MM/2NC-25N-M12 Factory From China
    Custom KJT standard proximity sensor ISS 118MM/4NC-8E0-M12 IS 130MM/4NO-25N-M12 IS 130MM/4NO-25N-M12 IS 130MM/2NO-25N-M12 IS 130MM/2NC-25N-M12 Factory From China
    KJT EX limit switch honeywell BXA3K BXA3K-1A LSA1A LSA2B LSYAC1E LSYJC1A-7N GLAB20A1B
    KJT EX limit switch honeywell BXA3K BXA3K-1A LSA1A LSA2B LSYAC1E LSYJC1A-7N GLAB20A1B
    KJT-NBB4-12M45-Z5-0.33M proximity sensor equivalent to pepperl-fuchs
    KJT-NBB4-12M45-Z5-0.33M proximity sensor equivalent to pepperl-fuchs
    KJT-NBB4-12M45-E1-0.45M proximity sensor equivalent to pepperl-fuchs
    KJT-NBB4-12M45-E1-0.45M proximity sensor equivalent to pepperl-fuchs
    KJT - Wireless sensor limit switch KB-5101
    KJT - Wireless sensor limit switch KB-5101
    KJT - Wireless limit switch KB-5101
    KJT - Wireless sensor limit switch
    KJT - Wireless sensor limit switch
    KJT - Micro switch - equivalent to Omron
    KJT - Micro switch - equivalent to Omron
    Use a switch with minimal force. It is a switch where external mechanical force acts on the action spring through a transmission component, causing the fixed contact and moving contact at its end to quickly connect or disconnect. Widely used in electronic equipment, instruments, mines, power systems, household appliances, electrical equipment, etc
    KJT-Laser ranging sensor
    KJT-Laser ranging sensor
    0-30m vertical/tilt detection Diffuse reflection detection multiplex output Not affected by color/material or glossiness
    KJT-BTL6 -PF- Series - Analog current Magnetostrictive linear position sensors in profile housing
    KJT-BTL6 -PF- Series - Analog current Magnetostrictive linear position sensors in profile housing
    KJT-BTL6 -PF- Series - Analog current Magnetostrictive linear position sensors in profile housing
    KJT - BTL6 -A1- Series - EtherCAT Magnetostrictive linear position sensors in profile housing
    KJT - BTL6 -A1- Series - EtherCAT Magnetostrictive linear position sensors in profile housing
    KJT - BTL6 -A1- Series - EtherCAT Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - Profinet Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - Profinet Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - Analog voltage Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - Analog voltage Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - Analog voltage Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - EtherNetIP Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - EtherNetIP Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - EtherNetIP Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - Analog voltage Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - Analog voltage Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - Analog voltage Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - Profinet Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - Profinet Magnetostrictive linear position sensors in profile housing
    KJT-BTL7 -P- Series - Profinet Magnetostrictive linear position sensors in profile housing
    M30 Namur proximity sensor
    M30 Namur proximity sensor
    KJT-D12P-DifferentialHallEffectSpeedSensor-SquareWaveSignalOutputfromPush-PullStagew/M12x11.0
    KJT-D12P-DifferentialHallEffectSpeedSensor-SquareWaveSignalOutputfromPush-PullStagew/M12x11.0"Thread
    KJT D12P series Differential Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. They exhibit a dynamic function, whereby pulse generation down to 5 Hz is guaranteed. The sensor must be oriented with respect to the pole wheel as shown in the dimensional drawing (see spec sheet below).
    KJT-D12A-LY - Differential Hall Effect Speed Sensor - Square Wave Signal Output from Push-Pull Stage w/M12x1 1.0
    KJT-D12A-LY - Differential Hall Effect Speed Sensor - Square Wave Signal Output from Push-Pull Stage w/M12x1 1.0" Thread D12A speed sensor
    The KJT-D12A-LY series Differential Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The D12A exhibits a static function, whereby pulse generation down to 5 Hz is guaranteed. D12A speed sensor
    M18 Namur proximity sensor
    M18 Namur proximity sensor

     

     

    Nanjing KJT Electric Co,.LTD

    About us

    Contact Us

    Contact Person : Tara
    Tel : +86 025 65019201
    E-mail : kaijite3@kjtsensor.com
    Address :Haoyue science and technology park, No.1 Fangyuanzhong Road,Jiangning District,Nanjing City,
    Jiangsu Province, China.211102
    WHATSAPP：+86 13951751584
    SKYPE :+86 13951751584
    South east Asia office：48/14 Ratchadaphisek20, 
     Huaikwang, BKK 10310 .

     

    Sitemap

    Copyright © 2019 Nanjing KJT Electric CO.,LTD | All Rights Reserved Design

    Get This APP
    Chat Online 编辑模式下无法使用
    Leave Your Message inputting...