PRODUCTS

●：Compact design facilitates equipment integration ●：Can be flexibly matched to application requirements through multiple parameter setting methods and adjustable sensitivity ●：Synchronous and multi-channel working methods can avoid mutual influence of sensors and ensure reliable measurement results. ●：Low-cost area monitoring via sensor synchronization ●：Offline sensor parameter settings on the display enable pre-configuration and save device commissioning time ●：Built-in temperature compensation for high measurement accuracy ●：Setup mode recognizes all objects between the sensor and the teach background

●：Compact design facilitates equipment integration ●：Can be flexibly matched to application requirements through multiple parameter setting methods and adjustable sensitivity ●：Synchronous and multi-channel working methods can avoid mutual influence of sensors and ensure reliable measurement results. ●：Low-cost area monitoring via sensor synchronization ●：Offline sensor parameter settings on the display enable pre-configuration and save device commissioning time ●：Built-in temperature compensation for high measurement accuracy ●：Setup mode recognizes all objects between the sensor and the teach background

Nominal voltage [V]: ：20...250 AC/DC Reverse polarity protection: ：no Rated current (continuous) [mA]:：350 AC (...50 °C) / 250 AC (...80 °C) / 100 DC Rated current (peak) [mA]:：2200

Nominal voltage [V]:：20...250 AC/DC Reverse polarity protection: ：no Rated current (continuous) [mA]：350 AC (...50 °C) / 250 AC (...80 °C) / 100 DC Rated current (peak) [mA]:：2200

Nominal voltage [V]：20...250 AC/DC Reverse polarity protection：no Protection level：II Rated current (continuous) [mA]：350 AC (...50 °C) / 250 AC (...80 °C) / 100 DC Rated current (peak) [mA]：2200

Nominal voltage [V]：10...36 DC Current consumption [mA]：< 15 Reverse polarity protection：yes Rated current (continuous) [mA]：250 Rated current (peak) [mA]：250

Nominal voltage [V]：10...36 DC Current consumption [mA]：< 15 Reverse polarity protection：是 Rated current (continuous) [mA]：250 Rated current (peak) [mA]：250

Rated sensing distance (SN)：10mm Rated voltage：24-240V Features：2-wire formed cable Action range：0-10mm Detection accuracy：3% of the actual detection distance Sr Protection level：IP67

Nominal voltage [V]:：20...250 AC/DC Reverse polarity protection:：否 Protection level: ：II Rated current (continuous) [mA]:：350 AC (...50 °C) / 250 AC (...80 °C) / 100 DC Rated current (peak) [mA]: ：2200

Nominal voltage [V]:：10...36 直流 Rated current (continuous) [mA]: ：< 15 Reverse polarity protection:：是 Protection level: ：II Rated current (continuous) [mA]:：250 / 15 Pressure drop [V]：< 2.5

Ambient temperature: ：-15℃~+65℃ Relative humidity:：No more than 80% Working voltage: ：AC220V±10% or DC24V Speed measurement range: ：20--1800 RPM；Belt speed 0.6--9.9 m/s Overall power consumption:：<15W Number and capacity of contacts:：5 groups normally open, 3A/220V

Operating power supply:：24VDC/110VAC/220VAC Insulation resistance: ：＞500MΩ Ambient temperature:：-20℃~+60℃ Overall dimensions:：Ф30×80mm Protection level: ：IP66

Power supply: ：220VAC±15％ Insulation resistance:：＞500MΩ Ambient temperature:：-20℃~+60℃ Overall dimensions:：Φ38×115mm Protection level:：IP66 Escape time: ：5秒

Operating power supply: ：220VAC±15％ Insulation resistance: ：＞500MΩ Ambient temperature:：-20℃~+60℃ Overall dimensions: ：Φ30×115mm Protection level: ：IP66 Escape time: ：3-17秒

Power supply voltage：8-30VDC Current consumption：Suitable for large 15mA Output signal Vo：Push-pull output Imax=+/-20mA,Ulow<2.5V,Uhigh>Usupply-3.5V Frequency Range：0-15KHz Air gap：Module1：0.2to0.6mmm；Module2：0.2to1.5mm Earthquake resistance：5gn（5…2000Hz范围内）

Reflection mode： diffuse reflection, reflective plate type, through-beam type Light source： infrared LED (880nm) Output mode：PNP NO/NC Power supply voltage：12…24VDC Response time：≤1ms Repeat accuracy：≤5%

Power supply voltage：10...36VDC 20...250VAC Response time：≤3ms Pointing angle：3°...20° Current consumption：<=20mA

Detection distance：5mm(groove width) Standard detection objec：opaque object 2×0.8mm Should be different distance：0.025mm Light source (luminescence wavelength)：GaAs infrared light-emitting diode (940nm) Display light*1：Lights up (red) when light is blocked

Reflection mode：diffuse reflection, reflective plate type, through-beam type Light source：infrared LED（880nm） Output mode：NPN PNP AC(2 wie） Power supply voltage：12…24VDC 90-250VAC Response time：≤1ms Repeat accuracy：≤5%

Reflection mode：diffuse reflection, reflective Type, through-beam Type Light source：infrared LED (880nm) Output mode：PNP NO/NC Power supply voltage：12…24VDC Response time：≤1ms Repeat accuracy：≤5%