Hall effect speed sensor

Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 … +260°F

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -13 °F ... +185 °F Degree of protection / EN 60529 IP65

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -13 °F ... +185 °F Degree of protection / EN 60529 IP65 Applications: Speed detection of gearwheels with small module and high resolution Š Applications in machine and plant construction Features: Detection from 0 Hz No alignment required Installation dimension DIN M14

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -13 °F ... +185 °F Degree of protection / EN 60529 IP65 Applications:  Speed detection of gearwheels with small module and high resolution Š Applications in machine and plant construction Features: Detection from 0 Hz  No alignment required  Installation dimension DIN M14

GENERAL SPECIFICATIONS KJT's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

KJT-GS100102-LY Speed Sensors HALL EFFCT 6mA 24VDC 22 AWG X1m BBB Cble

Speed Sensors HALL 24VDC Flnge Mnt 22 AWG X1m BBB Cble

The ZH10 Hall-effect Speed Sensor Sensors provide a durable, cost-effective solution in most harsh environments. The sensor is available in a 11,9 mm [15/32 in/0.46875 in] diameter, in a 25,4 mm [1.00 in] length. The aluminum package is simple to install and adjust. It does not require rotational orientation.

The flange mount gear tooth speed and direction sensors of Piher Sensing Systems are designed to precisely calculate speed and direction of ferrous gears in demanding environments such as vehicle transmissions. The hall-effect sensor measures the variation in flux found in the airgap between the magnet and the passing teeth. Based on its touchless technology and rugged design the SSH-G01 sensor provides true long-term reliability.

Hall effect speed sensor

KJTDQ-SNDH-T4P-G01-LY Speed Sensors 45mm Barrel, 4.5Vdc 1 Hz to 15kHz

The SNDH-H Series Hall-Effect Speed Sensors use a magnetically biased Hall-effect integrated circuit to accurately sense movement of ferrous metal targets. The specially designed IC (integrated circuit) and a permanent magnet are sealed in rugged, probe-type packages.

The SNDH-H Series Hall-Effect Speed Sensors use a magnetically biased Hall-effect integrated circuit to accurately sense movement of ferrous metal targets. The specially designed IC (integrated circuit) and a permanent magnet are sealed in rugged, probe-type packages.

GENERAL SPECIFICATIONS KJTDQ's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

GENERAL SPECIFICATIONS KJTDQ's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

GENERAL SPECIFICATIONS KJTDQ's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

KJTDQ's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

KJTDQ's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

KJT D12P series Differential Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. They exhibit a dynamic function, whereby pulse generation down to 5 Hz is guaranteed. The sensor must be oriented with respect to the pole wheel as shown in the dimensional drawing (see spec sheet below).

The KJT-D12A-LY series Differential Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The D12A exhibits a static function, whereby pulse generation down to 5 Hz is guaranteed. D12A speed sensor