How about market influence of KJTDQ?-KJTDQ Sensor

Be the Best Sensors’ Manufacturer and One Stop Solution Service

Attn:Tara Email:kaijite3@kjtsensor.com WhatsApp:+86 13951751584

Magnetostrictive sensor

How about market influence of KJTDQ?

2020-07-12

Today, in the Nanjing KJT Electric Co,.LTDDQ field, KJTDQ is treated as a major supplier of pretty good reputation. KJTDQ begins with carefully selected materials, then our expertly-trained manufacturing staff meticulously finishes and packages each and every product for you. KJTDQ is in the lead.
KJTDQ Array image296

KJTDQ Array image296

our company keeps improving the excellent quality of yarn break sensor for several decades. fibre optic amplifier is the main product of we. It is diverse in variety. We conduct process inspection in our teamDQ Sensor Manufacturers manufacture. Common assessments, such as colorfastness to washing and rubbing, fiber strength, fiber structure, and chemical reagents are carried out by the QC team. With its high sensitivity, the product has good signal processing. The product features the desired accuracy. It can produce exact results every time it runs and has minor variations between finished results. Its response time can be limited at 0.1ms.
KJTDQ Array image296

KJTDQ Array image296

Our environmental sustainability strategy is about reducing our own environmental impacts against ambitious targets and supporting our clients with their sustainability challenges.

Custom message

Related Products

KJT-MA240SAN-LY Speed Sensors 15.9 mm 60V High Output

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions.

KJTDQ-EX58H-LY - Variable Reluctance Speed (VRS) sensors

The KJTDQ-EX58H-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX58H is specifically designed for use in explosive atmospheres.

High temperature limit switch XWKH

M30 high temperature proximity sensor unshielded AC NO NC -25℃-+120℃

KJT-3030S20-LY Speed Sensors 15.9 mm 190V High Output

KJT-3030S20-LY Speed Sensors 15.9 mm 190V High Output

KJTDQ-EX38A-LY - VRS Sensor for use in Explosive Atmospheres w/3/8-24 UNF-2A 1.35" Thread Variable Reluctance Speed (VRS) sensors

The KJT-EX38A-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX38A is specifically designed for use in explosive atmospheres.

M30 high temperature proximity sensor unshielded AC NO NC size J30*55mm

M30 low temperature inductive proximity sensor unshielded AC NO NC Sn=15mm

KJT-LCZ460-30-LY Speed Sensors 76.2mm,4.5Vdcto26Vdc 1750mm [69 in] Lead

The LCZ Series Hall-effect Zero Speed Sensors provide a durable, cost-effective solution in most harsh environments. The sensor is available in 9,5 mm [3/8 in/0.375 in] and 15,9 mm [5/8 in/0.625 in] diameters, in both 50,8 mm [2.00 in] and 76,2 mm [3.00 in] lengths. The stainless steel package is simple to install and adjust. It does not require rotational orientation

KJTDQ- E58AM25-LY - VRS Sensor w/5/8-18 UNF-2A 2.5" Thread Variable Reluctance Speed (VRS) sensors

The KJT-E58AM25-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M6 fiber sensor through beam PNP/NPN Sn=1m stainless steel

High Quality Analog Output Proximity Inductive Sensor

KJT-ZH10-LY Speed Sensors 25.4mm,4Vdc to 24Vdc 910 mm [36 in] Lead

The ZH10 Hall-effect Speed Sensor Sensors provide a durable, cost-effective solution in most harsh environments. The sensor is available in a 11,9 mm [15/32 in/0.46875 in] diameter, in a 25,4 mm [1.00 in] length. The aluminum package is simple to install and adjust. It does not require rotational orientation.

M18 Namur proximity sensor

M31 laser sensor diffuse PNP NPN NO NC Sn=200/300mm adjustable

M30 inductive proximity sensor unshielded AC NO NC Sn15mm connector

KJT-3040AN30-LY Speed Sensors VRS M5K 5/8-18X3.0 MS CONN

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (

M12 high pressure proximity sensor 500bar L=78mm with M12 connector

M12 high pressure proximity sensor shielded NO NC NC+NO connector IP68

KJT-SHP10.GR17.E1-LY 1-Channel Hall M18 Stainless Steel Speed Sensors

KJT-SHP10.GR17.E1-LY 1-Channel Hall M18 Stainless Steel Speed Sensors

KJTDQ-F16A-LY - Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/M16x1.5 1.5" Thread

The KJT-F16A-LY series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F16A exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

M12 high pressure proximity sensor shielded PNP NPN NO NC NO+NC connector Stainless steel

Belt Conveyor Protection Deviation Switches

KJT-ZS-00434-01-LY Speed Sensors M12,2KHz, 10mA,ECKO Stainless Steel

KJT-ZS-00434-01-LY Speed Sensors M12,2KHz, 10mA,ECKO Stainless Steel

M8 Namur proximity sensor

Customized Conveyor Belt Deviation Switch with Factory Price

KJT-BTL7 -P- Series - Profinet Magnetostrictive linear position sensors in profile housing

Kjtdq-Kjt-SNG-SPRD-004-Ly Speed Sensors Hall Sensor, Right Angle, 67mm

GENERAL SPECIFICATIONS KJTDQ's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

Yarn capacitive sensor DU3B NPN PNP NC for textile

M30 low temperature inductive proximity sensor unshielded PNP NPN NO NC

KJT-3015A17-LY Speed Sensors VRS M3K 3/8-24X1.7 24 LDS

DESCRIPTION General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output si

M8 capacitive proximity sensor shielded PNP NPN NO NC NO+NC

M8 inductive proximity sensor unshielded 10-36VDC NO NC Sn=2mm IP67

KJT - BTL C1 - Profile PF - Analog Magnetostrictive linear position sensors in profile housing

High resolution of up to 0.5 µm Measuring lengths of up to 7620 mm Measures several positions and speeds at the same time Non-contacting, thus free from wear – no downtimes and a long service life Easy integration with equipment through a variety of interfaces – such as IO-Link, Profinet, EtherCAT, SSI, and analogously programmable output signals – in order to invert, configure, and document the measurement range Three housing variants for flexible and fast installation depending on the space requirements and application Floating and captive encoders

KJTDQ-F16A25-LY - Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/M16x1.5 2.5" Thread

The KJT-F16A25 series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F16A25 exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

M4 fiber optic sensor diffuse PNP/NPN Sn=40mm stainless steel fiber probe

M3 ultra small inductive proximity sensor shielded long sensing distance

KJT-GS101205-LY Speed Sensors HALL 24VDC Flnge Mnt Conctr Type IP67

The GS101205 series gear tooth speed sensors are Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing is needed. The single Hall design is immune to alignment issues allowing unlimited mounting positions. They provide a sinking current output.

M12 Laser photoelectric sensor through beam type

M30 high temperature proximity sensor shielded AC NO NC IP67 connector

M12 Gear Speed Sensor for Motor Speed Sensor

KJTDQ speed sensor EV58AM25 VRS Sensor w/Amplifier - Square Wave Signal Output from NPN w/5/8-18 UNF-2A 2.5" Thread

KJTDQ speed sensor EV58AM25 VRS Sensor w/Amplifier - Square Wave Signal Output from NPN w/5/8-18 UNF-2A 2.5" Thread

M8 inductive proximity sensor shielded 10-36VCD PNP NPN NO NC

KJT-SHN7.GN01.SC-LY 1-Channel Hall M16 Speed Sensors

KJT-SHN7.GN01.SC-LY 1-Channel Hall M16 Speed Sensors

KJTDQ-KJT-EX10A-LY - VRS Sensor for use in Explosive Atmospheres w/M10x1 1.3" Thread Variable Reluctance Speed (VRS) sensors

The KJT-EX10A-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

FS50 square photoelectric sensor diffuse NPN PNP NO NC Sn=1.5m adjustable

KJT - Micro switch - equivalent to Omron

Use a switch with minimal force. It is a switch where external mechanical force acts on the action spring through a transmission component, causing the fixed contact and moving contact at its end to quickly connect or disconnect. Widely used in electronic equipment, instruments, mines, power systems, household appliances, electrical equipment, etc

KJTDQ-F58A25-LY - Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/ 5/8-18 UNF-2A 2.5" Thread

The KJT-F58A25 series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F58A25 exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

M3 fiber optic sensor diffuse PNP/NPN Sn=0-60mm stainless steel optical sensors

M3 ultra small short inductive proximity sensor shielded long sensing distance

KJTDQ-SNDH-H3P-G01-LY Speed Sensors 6.5Vdc to 24Vdc 14mA max current

The SNDH-H Series Hall-Effect Speed Sensors use a magnetically biased Hall-effect integrated circuit to accurately sense movement of ferrous metal targets. The specially designed IC (integrated circuit) and a permanent magnet are sealed in rugged, probe-type packages.

High temperature limit switch XWKJ

M4 ultra small inductive proximity sensor shielded unthreaded PNP NPN

KJTDQ-3010AN-LY Speed Sensors VRS M5H 5/8-18X1.125

General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would re

Color mark sensor switch contrast detection Sn=28mm

PNP No 10-36V M12 High Pressure Proximity Sensor with M12 Connector-

KJT-3030AN-LY Speed Sensors High Output VRS 15kHz 56mm

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor’s pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak

Yarn capacitive sensor DU3C NPN PNP NC for textile

Corrosion-Resistant M12 Proximity Sensor with PTFE Materials

KJTDQ-TM-HAADA-LY Speed Sensors Transportation and Industrial Speed

KJT's Thrumold Series VRS (Variable Reluctance Speed) sensors are designed to detect engine timing and transmission speed by determining the speed and position of rotating shafts in heavy-duty, off-road, and construction vehicles, providing information to help improve engine combustion process efficiency. These passive VRS sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete cycle occurs as each tooth passes the

High temperature limit switch XWKG

M6.5 ultra small inductive proximity sensor shielded unthreaded L=18mm

KJTDQ-3070A-LY Speed Sensors Hazard Location VRS 40kHz 78mm

Hazardous Location VRS sensors are designed for use in locations where explosion-proof or intrinsically safe sensors are required.Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if view

M3 fiber optic sensor diffuse PNP/NPN Sn=0-80mm stainless steel fibre optic probe

M30 inductive proximity sensor shielded DC NO NC Sn15/22mm connector

KJTDQ-F12A-LY - Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/M12x1 1.5" Thread

The KJT-F12A series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F12A exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

FS30 square photoelectric sensor switch diffuse NPN PNP NO NC Sn=0.2/0.3m adjustable

KJT-SHP7.GP05.SB-LY 1-Channel Hall M18 Brass Speed Sensors

KJT-SHP7.GP05.SB-LY 1-Channel Hall M18 Brass Speed Sensors

KJTDQ-KJT-E58A-LY - VRS Sensor w/5/8-18 UNF-2A 1.5" Thread Variable Reluctance Speed (VRS) sensors

The KJT-E58A-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M8 inductive proximity sensor unshielded DC PNP NPN NO NC Sn=4mm/6mm

KJT-SNDH-T4C-G01-LY Speed Sensors 45mm Barrel, 4.5Vdc 1 Hz to 15kHz,OpFreQ

The SNDH-T Series is a dual differential hall sensor that provides speed and direction information using a quadrature output with signals 90 phase shifted from each other. Target direction is determined by output lead/lag phase shifting.

M8 capacitive proximity sensor shielded PNP NPN NO NC Sn=1mm IP67

M30 high temperature proximity sensor unshielded PNP NPN NO NC connector

KJT-3090A-LY Speed Sensors Hazard Location VRS 40kHz 78mm

Hazardous Location VRS sensors are designed for use in locations where explosion-proof or intrinsically safe sensors are required. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on

Yarn optical sensor DU30 NPN PNP NC for textile

M4 ultra small inductive proximity sensor shielded long sensing distance

KJTDQ-F16S Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/M16x1.5 2.0" Thread & 39" Leads

The Jaquet F16S series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F16S exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

M12 photoelectric sensor through beam PNP NPN NO NC NO+NC Sn=5m

KJT-SHN11.GK12.E4-LY 1-Channel Hall M14 Heavy Duty Speed Sensors

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 … +125°F

M18 capacitive proximity sensor shielded PNP NPN NO NC NO+NC

M30 high temperature proximity sensor unshielded NO NC -25℃-+120℃ connector

KJT-3030AN40-LY Speed Sensors 15.9 mm 190V High Output

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (

M6 fiber sensor probe diffuse PNP/NPN Sn=90mm stainless steel

KJT-BTL7 -P- Series - EtherNetIP Magnetostrictive linear position sensors in profile housing

KJT-BTL7 -P- Series - EtherNetIP Magnetostrictive linear position sensors in profile housing

KJT-E16S40-LY - VRS Sensor w/M16x1.5 4.0" Thread & 39" Leads Variable Reluctance Speed (VRS) sensors

The KJT-E16S40-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M12 high pressure proximity sensor shielded PNP NPN NO NC NO+NC IP68

KJT-SD101201-LY Speed Sensors Speed&Direction HALL Flange Mnt, Cnnctr

High temperature limit switch XWKE

KJT-Laser ranging sensor

0-30m vertical/tilt detection Diffuse reflection detection multiplex output Not affected by color/material or glossiness

KJTDQ-E16S25-LY - VRS Sensor w/M16x1.5 2.5" Thread & 39" Leads Variable Reluctance Speed (VRS) sensors

The KJT E16S25-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M12 capacitive proximity sensor unshielded DC PNP NPN NO NC Sn=4mm

KJT-3025A17-LY Speed Sensors VRS M3L 3/8-24X1.7 24 LDS

High Resolution VRS sensors are designed for use in applications where precise timing pulse is required, and/or fine pitch gears are used. Proper alignment of the sensor is required. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this o

M3 fiber sensor through beam PNP/NPN Sn=1000mm

KJT-SHP10.GR17.08-LY 1-Channel Hall M18 Stainless Steel Speed Sensors

KJT-SHP10.GR17.08-LY 1-Channel Hall M18 Stainless Steel Speed Sensors

M12 capacitive proximity sensor shielded PNP NPN NO NC Sn=1-3mm IP67

IEC IP67 standard Limit Switch Sensor Series

KJT-F58S-LY - Hall Effect Zero-Speed Sensor - Square Wave Signal Output from NPN w/ 5/8-18 UNF-2A 2.0" Thread & 39" Leads

The KJT F58S series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F58S exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

M8 inductive proximity sensor shielded DC PNP NPN NO NC long Sn=2mm/3mm

KJT-GS101202-LY Speed Sensors HALL 24VDC Flnge Mnt 22 AWG X1m BBB Cble

Speed Sensors HALL 24VDC Flnge Mnt 22 AWG X1m BBB Cble

High temperature limit switch XWKF

Nanjing KJT Electric Co,.LTD

Our main products are proximity sensor, photoelectric sensor,speed sensor,wireless sensor and so on.

CONTACT US

kjt sensor manufacturer

Copyright © 2019 Nanjing KJT Electric CO.,LTD | All Rights Reserved Design

Chat Online 编辑模式下无法使用

Leave Your Message inputting...

Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.

*Name：

*Phone：

*E-mail：

*Content：