How much will it take for detector sensor materials?-KJTDQ Sensor

Be the Best Sensors’ Manufacturer and One Stop Solution Service

Attn:Tara Email:kaijite3@kjtsensor.com WhatsApp:+86 13951751584

Magnetostrictive sensor

How much will it take for detector sensor materials?

2020-07-31

While in the business of producing detector sensor , the material cost can be one of the biggest expenses, directly affecting profitability. But it is possible to reduce material costs without compromising end product quality and changing customer expectations and dependencies. Like most effective commercial cost reduction measures, reducing commodity costs begins with a comprehensive analysis of the various direct and auxiliary ways in which cash flows from the underlying materials are consumed. Here lists some of the ways Nanjing KJT Electric Co,.LTD does to reduce materials cost, to bring benefits to both customers and ourselves: use the lower-cost alternatives if possible, reduce waste, eliminate unnecessary product features, etc.
KJTDQ Array image203

KJTDQ Array image203

KJT is a comprehensive measuring sensor company with resource advantages. We will show you the Photoelectric sensor series that is most popular with customers. High quality raw materials: When KJTDQ safety light curtain sensor is created, they are carefully selected from reliable industrial suppliers to ensure their longevity. Also, many trials are carried out to select the right material before they enter the factory. It can detect and respond quickly to some types of input. This product is stain resistant to some extent. There is comparatively more effort placed on assessing its materials for resistance to general soiling in the manufacturing. Adopting energy-saving technologies, the product consumes little energy.
KJTDQ Array image203

KJTDQ Array image203

KJT holds the firm belief that the quality stands above everything. Inquiry!

Custom message

Related Products

KJT-MA233SAN-LY Speed Sensors 15.9 mm 175V High Output

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (

KJTDQ-KJT-E58A25-LY - VRS Sensor w/5/8-18 UNF-2A 2.5" Thread Variable Reluctance Speed (VRS) sensors

The KJT-E58A25-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M6 fiber sensor through beam PNP/NPN Sn=1m stainless steel

High Temperature Photoelectric Diffuse Sensor switch

KJT-3080-LY Speed Sensors 8mm, 10-32 UNF 2A Round, 1.57mm Pole

General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps.

KJT-E16AM-LY - Variable Reluctance Speed (VRS) sensors VRS Sensor w/M16x1.5 1.5" Thread

The KJT-E16AM-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

Square proximity sensor ABS PNP NPN NO NC Sn=5mm IP67

M6.5 ultra small inductive proximity sensor unshielded PNP NPN NO NC L type

KJT-SNG-QPDB-002-LY Speed Sensors Magspeed Quadrature Speed Sensor

KJT's SNG-Q Series Quadrature Speed and Direction Sensors are designed to provide both speed and direction information. Speed information is provided from digital square wave outputs; direction is provided using a quadrature output with signals 90° phase shifted from each other. With the quadrature output, target direction is determined by output lead/lag phase shifting.

M18 capacitive proximity sensor Unshielded NO NC NO+NC Sn=1-15mm

M12 Hall Proximity Sensor , Gear Speed Sensor For Hydraulic Motor

M30 inductive proximity sensor unshielded AC NO NC connector

KJTDQ-3010AN-LY Speed Sensors VRS M5H 5/8-18X1.125

General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would re

Q31 Laser photoelectric sensor through beam type

M30 high pressure proximity sensor shielded PNP NPN NO NC NO+NC Sn=1.5mm

KJT-SHN7.GN01.SC-LY 1-Channel Hall M16 Speed Sensors

KJT-SHN7.GN01.SC-LY 1-Channel Hall M16 Speed Sensors

KJTDQ-F12S-LY Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/M12x1 2.0" Thread & 39" Leads

The KJT-F12S-LY series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F12S exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

M8 inductive proximity sensor unshielded DC PNP NPN NO NC connector M8*60mm

Photoelectric Sensor Switch Reflector Card

KJT-3050S10-LY Speed Sensors 6.4 mm 12V General Purpose

DESCRIPTION General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output sig

KJT-D12P-DifferentialHallEffectSpeedSensor-SquareWaveSignalOutputfromPush-PullStagew/M12x11.0"Thread

KJT D12P series Differential Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. They exhibit a dynamic function, whereby pulse generation down to 5 Hz is guaranteed. The sensor must be oriented with respect to the pole wheel as shown in the dimensional drawing (see spec sheet below).

M12 laser sensor diffuse PNP NPN NO NC Sn=200/300mm adjustable

M30 inductive proximity sensor unshielded AC NO NC Sn15mm

KJTDQ-SNDH-H3C-G04-LY Speed Sensors 6.5Vdc to 24Vdc 14mA max current

The SNDH-H Series Hall-Effect Speed Sensors use a magnetically biased Hall-effect integrated circuit to accurately sense movement of ferrous metal targets. The specially designed IC (integrated circuit) and a permanent magnet are sealed in rugged, probe-type packages.

M5 Laser photoelectric sensor diffuse type

M30 high temperature proximity sensor unshielded PNP NPN NO NC connector

KJT-SD100203-LY Speed Sensors 5 - 24VDC Sink

KJT-SD100203-LY Speed Sensors 5 - 24VDC Sink

KJTDQ-KJT-E16S-LY - VRS Sensor w/M16x1.5 2.0" Thread & 39" Leads Variable Reluctance Speed (VRS) sensors

The KJT-E16S-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M12 photoelectric sensor diffuse PNP NPN NO NC NO+NC Sn=0.1/0.2/0.3m adjustable

KJT - Wireless sensor limit switch

KJTDQ KJT-3040AN25-LY Industrial VRS Magnetic Speed Sensors Speed Sensors 15.9mm, M16, 70 Vp-p Round, 4.75mm Pole

Power Output VRS sensors are designed for driving low resistance loads at large air gaps in applications where larger actuators may be used. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine w

Color mark sensor switch contrast detection Sn=28mm

Yarn capacitive sensor DU3A NPN PNP NC for textile

KJT-SNDH-T4P-G02-LY Speed Sensors 45mm Barrel, 4.5Vdc 1 Hz to 15kHz,OpFreQ

KJT-SNDH-T4P-G02-LY Speed Sensors 45mm Barrel, 4.5Vdc 1 Hz to 15kHz,OpFreQ

M12 capacitive proximity sensor shielded PNP NPN NO NC Sn=1-3mm IP67

M8 inductive proximity sensor unshielded 10-36VDC NO NC Sn=2mm

KJT-SHN10.GN03.E1-LY 1-Channel Hall M16 Speed Sensors

1-Channel Hall M16 series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 °F ... +257 °F Degree of protection IP67, IP69K (depending on type)

KJTDQ-KJT-EX10A-LY - VRS Sensor for use in Explosive Atmospheres w/M10x1 1.3" Thread Variable Reluctance Speed (VRS) sensors

The KJT-EX10A-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

FSU30 trough type photoelectric sensor through beam NPN PNP NO NC Sn=30mm

M30 inductive proximity sensor shielded DC NO NC Sn15/22mm connector

Kjtdq-Kjt-Sng-Sprd-002-Ly Speed Sensors Hall Sensor, Right Angle, 67mm

GENERAL SPECIFICATIONS KJTDQ's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

M5 namur explosion-proof inductive proximity sensor shielded Sn=0.8mm

KJT provide a full range of inductive sensors, mainly for the detection of metal objects. These products are widely used in packaging and plastics machinery, production lines and conveying systems. They come in various forms, with digital (SCR, transistor) and analog outputs. The inductive proximity sensors have round housing size of 3mm to 30mm, standard or enhanced sensing distance, shielded or unshielded form is optional

PNP No 10-36V M12 High Pressure Proximity Sensor with M12 Connector-

KJT-3030AN40-LY Speed Sensors 15.9 mm 190V High Output

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (

KJT--D12A differential Hall-Effect speed sensor 8-32DVC

M30 low temperature proximity sensor shielded PNP NPN NO NC Sn=10mm

KJT-SSH-G01-002-CP-R-LY Speed Sensors Hall-Effect Speed Sensor two wire current source - CW (reverse)

The flange mount gear tooth speed and direction sensors of Piher Sensing Systems are designed to precisely calculate speed and direction of ferrous gears in demanding environments such as vehicle transmissions. The hall-effect sensor measures the variation in flux found in the airgap between the magnet and the passing teeth. Based on its touchless technology and rugged design the SSH-G01 sensor provides true long-term reliability.

M22 high pressure proximity sensor 500bar L=79mm with M12 connector

M12 inductive proximity sensor unshielded NPN PNP NO NC Sn=4mm IP67

KJT-LCZ260-30 Speed Sensors ZERO SPEED 3/8-24X3 HALL EFFECT SENSOR

M12 capacitive proximity sensor Unshielded PNP NPN NO NC Sn=1-6mm

M12 high pressure proximity sensor shielded PNP NPN NO NC NO+NC connector

KJT-1GM1000-LY Speed Sensors COMM SOLID STATE/MAG

M30 capacitive proximity sensor unshielded PNP NPN NO NC NO+NC

M18 high pressure proximity sensor shielded PNP NPN NO NC IP68

KJT-SNDH-T4C-G01-LY Speed Sensors 45mm Barrel, 4.5Vdc 1 Hz to 15kHz,OpFreQ

The SNDH-T Series is a dual differential hall sensor that provides speed and direction information using a quadrature output with signals 90 phase shifted from each other. Target direction is determined by output lead/lag phase shifting.

M18 capacitive proximity sensor Unshielded Sn=1-15mm adjustable

M12 high pressure proximity sensor shielded PNP NPN NO NC NO+NC Sn=1.5mm

M12 Gear Speed Sensor for Motor Speed Sensor

M30 flushed speed switch 2 wire AC/DC KJT-KG-JZ-K5

M30 high temperature proximity sensor shielded AC NO NC IP67 connector

KJT-ZH10-LY Speed Sensors 25.4mm,4Vdc to 24Vdc 910 mm [36 in] Lead

The ZH10 Hall-effect Speed Sensor Sensors provide a durable, cost-effective solution in most harsh environments. The sensor is available in a 11,9 mm [15/32 in/0.46875 in] diameter, in a 25,4 mm [1.00 in] length. The aluminum package is simple to install and adjust. It does not require rotational orientation.

M18 Laser photoelectric sensor through beam type

M30 low temperature inductive proximity sensor unshielded AC NO NC Sn=15mm

KJT-GS101205-LY Speed Sensors HALL 24VDC Flnge Mnt Conctr Type IP67

The GS101205 series gear tooth speed sensors are Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing is needed. The single Hall design is immune to alignment issues allowing unlimited mounting positions. They provide a sinking current output.

Yarn capacitive sensor DU3B NPN PNP NC for textile

M6.5 ultra small inductive proximity sensor unshielded PNP NPN NO NC L=22mm

Kjtdq-Kjt-SNG-SPRD-004-Ly Speed Sensors Hall Sensor, Right Angle, 67mm

GENERAL SPECIFICATIONS KJTDQ's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

M6 fiber sensor through beam PNP/NPN Sn=0-1000mm nickel plated brass

KJT-BTL7 -P- Series - Analog voltage Magnetostrictive linear position sensors in profile housing

KJT-BTL7 -P- Series - Analog voltage Magnetostrictive linear position sensors in profile housing

KJTDQ- KJT-EV58S40-LY - VRS Sensor w/Amplifier - Square Wave Signal Output from NPN w/5/8-18 UNF-2A 4.0" Thread & 39" Leads Variable Reluctance Speed (VRS) sensor

The KJT-EV58S40-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet and an amplifier. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The signal is converted to a square wave signal with constant amplitude by the integrated amplifier. The frequency of the output signal is proportional to the speed of the moving target.

M8*45mm inductive proximity sensor shielded AC NO NC Sn=2mm IP67

KJT-SNG-SPRC-001-LY Speed Sensors HALL SENSOR,RIGHT ANGLE, 46MM

GENERAL SPECIFICATIONS KJT's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

M30 KJT-KG-Z-K1 speed switch

M30 low temperature inductive proximity sensor shielded AC NO NC Sn=10mm

KJT-3010HTB-LY Speed Sensors M16,25Vp-p,2.69mm 5/8-18 UNF-2A,15.9mm

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (

M30 low temperature inductive proximity sensor unshielded connector brass nickel plated

KJT - Micro switch - equivalent to Omron

Use a switch with minimal force. It is a switch where external mechanical force acts on the action spring through a transmission component, causing the fixed contact and moving contact at its end to quickly connect or disconnect. Widely used in electronic equipment, instruments, mines, power systems, household appliances, electrical equipment, etc

KJTDQ KJT-EX10S-LY - VRS Sensor for use in Explosive Atmospheres w/M10x1 1.3" Thread & 39" Leads Variable Reluctance Speed (VRS) sensors

The KJT-EX10S-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX10S is specifically designed for use in explosive atmospheres.

M8 inductive proximity sensor unshielded DC PNP NPN NO NC Sn=4mm/6mm

KJT-3070A35-LY Speed Sensors Explosion Proof 60V VRS Sensor

DESCRIPTION Hazardous Location VRS sensors are designed for use in locations where explosion-proof or intrinsically safe sensors are required. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave

Q31 Laser photoelectric sensor diffuse type

M6.5 ultra small short inductive proximity sensor unshielded PNP NPN NO NC L=35mm

KJTDQ-F16S Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/M16x1.5 2.0" Thread & 39" Leads

The Jaquet F16S series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F16S exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

M5 laser sensor diffuse PNP NPN NO NC Sn=100/130mm adjustable IP65

KJT-KB5102-LY Limit switch

KJT-KB5102-LY Limit switch

M12 Laser photoelectric sensor through beam type

M3 ultra small inductive proximity sensor shielded long sensing distance

KJTDQ-F12A-LY - Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/M12x1 1.5" Thread

The KJT-F12A series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F12A exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

M8 inductive proximity sensor shielded DC PNP NPN NO NC long Sn=2mm/3mm

KJT-3015A17-LY Speed Sensors VRS M3K 3/8-24X1.7 24 LDS

DESCRIPTION General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output si

Yarn optical sensor DU30 NPN PNP NC for textile

M30 inductive proximity sensor unshielded PNP/NPN NO NC Sn25/40mm

KJTDQ-KJT-E58A-LY - VRS Sensor w/5/8-18 UNF-2A 1.5" Thread Variable Reluctance Speed (VRS) sensors

The KJT-E58A-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M30 high temperature proximity sensor shielded PNP NPN NO NC NO+NC

KJTDQ-MA3055S10-LY Speed Sensors VRS 1/4 X 1 450 DEGREE FBTPP 28

High Temperature VRS sensors are designed for use in applications where the sensor is exposed to temperatures up to 260 ºC [450 ºF]. Sealed Front-End versions are available for applications where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs a

Ring proximity sensor ABS NPN PNP NO NC Sn=0-5mm connector

KJT-MA240SAN-LY Speed Sensors 15.9 mm 60V High Output

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions.

M18 Laser photoelectric sensor diffuse type

M30 inductive proximity sensor unshielded AC NO NC Sn15mm connector

Nanjing KJT Electric Co,.LTD

Our main products are proximity sensor, photoelectric sensor,speed sensor,wireless sensor and so on.

CONTACT US

kjt sensor manufacturer

Copyright © 2019 Nanjing KJT Electric CO.,LTD | All Rights Reserved Design

Chat Online 编辑模式下无法使用

Leave Your Message inputting...

Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.

*Name：

*Phone：

*E-mail：

*Content：