PRODUCTS

KJT-SHP10.GN03.E05B-LY 1-Channel Hall M16 Speed Sensors

KJT-SHP10.GN03.E1-LY 1-Channel Hall M16 Speed Sensors

1-Channel Hall M16 series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 °F ... +257 °F Degree of protection IP67, IP69K (depending on type)

1-Channel Hall M16 series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 °F ... +257 °F Degree of protection IP67, IP69K (depending on type)

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 … +125°F

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 … +125°F

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 … +125°F

Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 … +260°F

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -13 °F ... +185 °F Degree of protection / EN 60529 IP65

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -13 °F ... +185 °F Degree of protection / EN 60529 IP65 Applications: Speed detection of gearwheels with small module and high resolution Š Applications in machine and plant construction Features: Detection from 0 Hz No alignment required Installation dimension DIN M14

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -13 °F ... +185 °F Degree of protection / EN 60529 IP65 Applications:  Speed detection of gearwheels with small module and high resolution Š Applications in machine and plant construction Features: Detection from 0 Hz  No alignment required  Installation dimension DIN M14

KJT-SHG31.GE00.SB-LY Channel Hall M8 Speed Sensor with temperature detection

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions.

DESCRIPTION High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to p

MATERIAL: BODIES, INSERTS, & COUPLING NUT: STAINLESS STEEL PER AMS-5640, ALLOY UNS S30300, TYPE 1 LOCK RING & CONTACTS: BERYLLIUM COPPER PER ASTM B196, ALLOY No. UNS C17300, TD04 SLEEVE: BRASS PER ASTM B16, ALLOY UNS No. C36000 BEADS: POLYETHERMIDE PER ASTM D5205 "ULTEM 1000" BELLOWS SPRINGS: ELECTRO-DEPOSITED GOLD OVER NICKEL GASKET: SILICONE RUBBER PER A-A-59588, CLASS 2B, GRADE 50/60 RESISTOR ELEMENT: ALUMINUM NITRIDE SUBSTRATE WITH TANTALUM NITRIDE RESISTOR: GOLD PLATED TERMINATIONS

KJT-3030S20-LY Speed Sensors 15.9 mm 190V High Output

GENERAL SPECIFICATIONS KJT's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

GENERAL SPECIFICATIONS KJT's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

■ Double circuit travel switch, stable and reliable, small size, economical and practical ■ The housing is made of aluminum alloy, with solid structure ■ IP66 grade protection, waterproof, oil proof and dust-proof structure; ■ The built-in microswitch has a double reed design structure, which has a long mechanical life ■ It is suitable for foggy and water vapor rich applications, such as spraying equipment, three-dimensional garage, environmental protection machinery, etc.