How can I track my inductive proximity sensor ?-KJTDQ Sensor

Be the Best Sensors’ Manufacturer and One Stop Solution Service

Attn:Tara Email:kaijite3@kjtsensor.com WhatsApp:+86 13951751584

Magnetostrictive sensor

How can I track my inductive proximity sensor ?

2020-09-12

You can easily know the logistics of inductive proximity sensor through various ways. After we deliver the goods, you will receive a tracking number so that you can check the information on line by yourself. Our staff are professional who will send you updated logistics, which can save you a lot of time and energy.
KJTDQ Array image368

KJTDQ Array image368

Nanjing KJT Electric Co,.LTDDQ has a solid management system to guarantee the quality of laser photoelectric sensor. According to the material, KJT's products are divided into several categories, and conveyor belt safety switches is one of them. Monitored production process: the production process of KJTDQ high temperature safety limit switch is strictly and constantly monitored. A 24 hours shift system is carried out to ensure high-efficiency production. This product has the characteristic of explosion-proof. It has good strength. Its materials have the required toughness to resist deformation under stress and resist fracture due to high impact load. Its protection degree is up to IP67.
KJTDQ Array image368

KJTDQ Array image368

KJTDQ will constantly adjust itself to suit the requirements of customers. Check it!

Custom message

Related Products

KJT-3030S20-LY Speed Sensors 15.9 mm 190V High Output

KJT-3030S20-LY Speed Sensors 15.9 mm 190V High Output

KJT-LCZ460-LY Speed Sensors 50.8mm,4.5Vdcto26Vdc 1750mm [69 in] Leads

The LCZ Series Hall-effect Zero Speed Sensors provide a durable, cost-effective solution in most harsh environments. The sensor is available in 9,5 mm [3/8 in/0.375 in] and 15,9 mm [5/8 in/0.625 in] diameters, in both 50,8 mm [2.00 in] and 76,2 mm [3.00 in] lengths. The stainless steel package is simple to install and adjust. It does not require rotational orientation.

KJTDQ-EX34H35-LY - VRS Sensor for use in Explosive Atmospheres w/3/4-20 UNEF-2A 3.5" Thread & 10′ Leads Variable Reluctance Speed (VRS) sensors

The KJT-EX34H35-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX34H35 is specifically designed for use in explosive atmospheres.

M30 KJT-KG-Z-K1 speed switch

M30 low temperature inductive proximity sensor unshielded 10-36VDC NO NC

M8 inductive proximity sensor shielded PNP NPN NO NC Sn=1mm

Photoelectric Sensor Switch Reflector Card

KJT-BTL7 -P- Series - Profinet Magnetostrictive linear position sensors in profile housing

High temperature limit switch XWKI

KJTDQ-SNDH-H3P-G01-LY Speed Sensors 6.5Vdc to 24Vdc 14mA max current

The SNDH-H Series Hall-Effect Speed Sensors use a magnetically biased Hall-effect integrated circuit to accurately sense movement of ferrous metal targets. The specially designed IC (integrated circuit) and a permanent magnet are sealed in rugged, probe-type packages.

KJTDQ-E16S25-LY - VRS Sensor w/M16x1.5 2.5" Thread & 39" Leads Variable Reluctance Speed (VRS) sensors

The KJT E16S25-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

Q31 Laser photoelectric sensor diffuse type

Square proximity sensor ABS PNP NPN NO NC Sn=5mm IP67

M12 inductive proximity sensor unshielded AC NO NC Sn=6mm/8mm

J6.5 ultra small inductive proximity sensor unshielded PNP NPN NO NC

KJT-SHN11.GK12.E4-LY 1-Channel Hall M14 Heavy Duty Speed Sensors

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 … +125°F

KJT-3024-LY Speed Sensors M12, 55Vp-p, .25mm 3/8-24 UNF-2A, 9.5mm

High Resolution VRS sensors are designed for use in applications where precise timing pulse is required, and/or fine pitch gears are used. Proper alignment of the sensor is required. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor’s pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals.

KJTDQ-EX38A-LY - VRS Sensor for use in Explosive Atmospheres w/3/8-24 UNF-2A 1.35" Thread Variable Reluctance Speed (VRS) sensors

The KJT-EX38A-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX38A is specifically designed for use in explosive atmospheres.

M18 high pressure proximity sensor 500bar L=61mm with M12 connector

M3 fiber optic sensor diffuse PNP/NPN Sn=0-60mm stainless steel optical sensors

M8 inductive proximity sensor unshielded AC NO NC Sn=2mm IP67

M12 DC 10-36V Inductive Sensor Switch with Full Metal Housing

KJT-SHN10.GR17.E1-LY 1-Channel Hall M18 Stainless Steel Speed Sensors

1-Channel Hall M18 Stainless Steel Speed Sensors

KJT-SNG-QPMB-000-LY Speed Sensors Magspeed Quadrature Speed Sensor

KJT's SNG-Q Series Quadrature Speed and Direction Sensors are designed to provide both speed and direction information. Speed information is provided from digital square wave outputs; direction is provided using a quadrature output with signals 90° phase shifted from each other. With the quadrature output, target direction is determined by output lead/lag phase shifting.

KJTDQ EX58H35 -Variable Reluctance Speed (VRS) sensors

The KJT-EX58H35-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX58H35 is specifically designed for use in explosive atmospheres.

M30 shielded speed switch 3 wire PNP KJT-KG-JZ-K3 SN 10mm

M4 fiber quality sensor through beam PNP/NPN Sn=1m stainless steel optical sensor

M22 high pressure proximity sensor shielded PNP NPN NO NC NO+NC IP68

M3 ultra small short inductive proximity sensor shielded unthreaded L=15mm

KJT-SHP10.GN03.E1-LY 1-Channel Hall M16 Speed Sensors

KJT-SHP10.GN03.E1-LY 1-Channel Hall M16 Speed Sensors

KJT-3025A17-LY Speed Sensors VRS M3L 3/8-24X1.7 24 LDS

High Resolution VRS sensors are designed for use in applications where precise timing pulse is required, and/or fine pitch gears are used. Proper alignment of the sensor is required. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this o

KJTDQ KJT-EX10S-LY - VRS Sensor for use in Explosive Atmospheres w/M10x1 1.3" Thread & 39" Leads Variable Reluctance Speed (VRS) sensors

The KJT-EX10S-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX10S is specifically designed for use in explosive atmospheres.

M12 high pressure proximity sensor shielded PNP NPN with M12 connec

Ring shape inductive proximity sensor ABS NPN PNP NO NC Sn=0-12mm IP67 connector m8

M12 inductive proximity sensor unshielded 10-36VDC PNP NPN NO NC

M30 inductive proximity sensor shielded AC NO NC Sn10mm connector

M30 Namur proximity sensor

KJTDQ-SNDH-H3C-G04-LY Speed Sensors 6.5Vdc to 24Vdc 14mA max current

The SNDH-H Series Hall-Effect Speed Sensors use a magnetically biased Hall-effect integrated circuit to accurately sense movement of ferrous metal targets. The specially designed IC (integrated circuit) and a permanent magnet are sealed in rugged, probe-type packages.

KJT- E12S - VRS Sensor w/M12x1 2.0" Thread & 39" Leads speed sensor

High temperature limit switch XWKB

M8 inductive proximity sensor shielded 10-36VDC PNP NPN NO NC Sn=1mm

Textile Yarn Break Gear Speed Switch/Sensor Directionless Series

KJT-SHP7.GR09.SC-LY 1-Channel Hall M18 Stainless Steel Speed Sensors

KJT-SHP7.GR09.SC-LY 1-Channel Hall M18 Stainless Steel Speed Sensors

KJT-3090A-LY Speed Sensors Hazard Location VRS 40kHz 78mm

Hazardous Location VRS sensors are designed for use in locations where explosion-proof or intrinsically safe sensors are required. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on

KJTDQ-KJT-EX10A-LY - VRS Sensor for use in Explosive Atmospheres w/M10x1 1.3" Thread Variable Reluctance Speed (VRS) sensors

The KJT-EX10A-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M6 Laser photoelectric sensor through beam type

M18 photoelectric sensor retro reflection PNP NPN NO NC NO+NC Sn=2m adjustable

M30 low temperature proximity sensor shielded PNP NPN NO NC NO+NC connector

KJT-BTL7 -P- Series - EtherNetIP Magnetostrictive linear position sensors in profile housing

KJT-BTL7 -P- Series - EtherNetIP Magnetostrictive linear position sensors in profile housing

KJT-ZH10-LY Speed Sensors 25.4mm,4Vdc to 24Vdc 910 mm [36 in] Lead

The ZH10 Hall-effect Speed Sensor Sensors provide a durable, cost-effective solution in most harsh environments. The sensor is available in a 11,9 mm [15/32 in/0.46875 in] diameter, in a 25,4 mm [1.00 in] length. The aluminum package is simple to install and adjust. It does not require rotational orientation.

KJTDQ-EX58S25-LY - Variable Reluctance Speed (VRS) sensors VRS Sensor for use in Explosive Atmospheres w/5/8-18 UNF-2A 2.5" Thread & 10' Leads

The KJT EX58S25 series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX58S25 is specifically designed for use in explosive atmospheres.

M12 high pressure proximity sensor 500bar L=69mm with M12 connector

Square proximity sensor sale ABS 10-36VDC PNP NPN NO NC Sn=2mm

M30 high temperature proximity sensor unshielded NO NC -25℃-+120℃ connector

KJT - BTL6 -A1- Series - EtherCAT Magnetostrictive linear position sensors in profile housing

KJT - BTL6 -A1- Series - EtherCAT Magnetostrictive linear position sensors in profile housing

KJT-SSH-G01-002-CP-R-LY Speed Sensors Hall-Effect Speed Sensor two wire current source - CW (reverse)

The flange mount gear tooth speed and direction sensors of Piher Sensing Systems are designed to precisely calculate speed and direction of ferrous gears in demanding environments such as vehicle transmissions. The hall-effect sensor measures the variation in flux found in the airgap between the magnet and the passing teeth. Based on its touchless technology and rugged design the SSH-G01 sensor provides true long-term reliability.

KJTDQ EX58AM40 - Variable Reluctance Speed (VRS) sensors w/5/8-18 UNF-2A 4.0" Thread

The KJT-EX58AM40-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX58AM40 is specifically designed for use in explosive atmospheres.

M18 Laser photoelectric sensor through beam type

M18 photoelectric sensor through beam PNP NPN NO NC NO+NC Sn=15m

M30 low temperature inductive proximity sensor unshielded PNP NPN NO NC

KJT-SHN7.GP00.SC-LY 1-Channel Hall M18 Brass Speed Sensors

KJT-SHN7.GP00.SC-LY 1-Channel Hall M18 Brass Speed Sensors

KJT-3015A35-LY Speed Sensors VRS M3L 3/8-24X3.5 24 LDS

General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would re

Kjtdq-Kjt-E58A40-Ly - Vrs Sensor W/5/8-18 Unf-2A 2.5" Thread Variable Reluctance Speed (VRS) Sensors

The KJT-E58A40-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

Yarn optical sensor DU30 NPN PNP NC for textile

M8 inductive proximity sensor shielded 10-36VDC NO NC Sn=1mm

M3 ultra small inductive proximity sensor shielded long sensing distance

KJT-SNG-SPRC-001-LY Speed Sensors HALL SENSOR,RIGHT ANGLE, 46MM

GENERAL SPECIFICATIONS KJT's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

KJTDQ KJT-3040AN25-LY Industrial VRS Magnetic Speed Sensors Speed Sensors 15.9mm, M16, 70 Vp-p Round, 4.75mm Pole

Power Output VRS sensors are designed for driving low resistance loads at large air gaps in applications where larger actuators may be used. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine w

M18 capacitive proximity sensor shielded PNP NPN NO NC NO+NC

M6 fiber sensor through beam PNP/NPN Sn=1m stainless steel

M30 high temperature proximity sensor shielded NO NC -25℃-+120℃ connector

KJT-BTL7 -P- Series - Analog voltage Magnetostrictive linear position sensors in profile housing

KJT-BTL7 -P- Series - Analog voltage Magnetostrictive linear position sensors in profile housing

KJT-3040A25-LY Speed Sensors VRS SPEED SENSOR

Power Output VRS sensors are designed for driving low resistance loads at large air gaps in applications where larger actuators may be used. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine w

KJTDQ-KJT-E58A-LY - VRS Sensor w/5/8-18 UNF-2A 1.5" Thread Variable Reluctance Speed (VRS) sensors

The KJT-E58A-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

High temperature limit switch XWKD

M8 inductive proximity sensor unshielded PNP NPN NO NC Sn=2mm IP67

M30 inductive proximity sensor unshielded DC NO NC Sn15mm

KJT-3050S10-LY Speed Sensors 6.4 mm 12V General Purpose

DESCRIPTION General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output sig

KJTDQ-EX58H-LY - Variable Reluctance Speed (VRS) sensors

The KJTDQ-EX58H-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX58H is specifically designed for use in explosive atmospheres.

M12 Laser photoelectric sensor diffuse type

M8 inductive proximity sensor shielded DC PNP NPN NO NC long Sn=2mm/3mm

M6.5 ultra small inductive proximity sensor unshielded PNP NPN NO NC L type

KJT-SNG-QPDB-000-LY Speed Sensors Magspeed Quadrature Speed Sensor

KJT's SNG-Q Series Quadrature Speed and Direction Sensors are designed to provide both speed and direction information. Speed information is provided from digital square wave outputs; direction is provided using a quadrature output with signals 90° phase shifted from each other. With the quadrature output, target direction is determined by output lead/lag phase shifting.

KJTDQ-F16A25-LY - Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/M16x1.5 2.5" Thread

The KJT-F16A25 series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F16A25 exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

M4 Laser photoelectric sensor through beam type

Squre Type Q31 Laser Infrared Beam Sensor with 50m Distance

M6.5 ultra small inductive proximity sensor shielded unthreaded PNP NPN NO NC

High temperature limit switch XWKA

KJTDQ-EX58S-LY Variable Reluctance Speed (VRS) sensors VRS Sensor for use in Explosive Atmospheres w/5/8-18 UNF-2A 2.0" Thread & 10' Leads

M4 Laser photoelectric sensor diffuse type

M8 inductive proximity sensor unshielded DC NO NC Sn=4mm

M30 inductive proximity sensor unshielded AC NO NC Sn15mm connector

KJT-3030HTB-LY Speed Sensors VRS H5Q 5/8-18X1.1 450F

High Temperature VRS sensors are designed for use in applications where the sensor is exposed to temperatures up to 260 ºC [450 ºF]. Sealed Front-End versions are available for applications where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs a

KJTDQ-KJT-E58A25-LY - VRS Sensor w/5/8-18 UNF-2A 2.5" Thread Variable Reluctance Speed (VRS) sensors

The KJT-E58A25-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M12 high pressure proximity sensor shielded PNP NPN NO NC NO+NC connector Stainless steel

M12 inductive proximity sensor unshielded AC NO NC Sn=4mm IP67

KJT-SHP7.GP00.SC-LY 1-Channel Hall M18 Brass Speed Sensors

KJT-SHP7.GP00.SC-LY 1-Channel Hall M18 Brass Speed Sensors

KJTDQ-SNDH-T4P-G01-LY Speed Sensors 45mm Barrel, 4.5Vdc 1 Hz to 15kHz

KJTDQ-SNDH-T4P-G01-LY Speed Sensors 45mm Barrel, 4.5Vdc 1 Hz to 15kHz

M12 capacitive proximity sensor unshielded DC PNP NPN NO NC Sn=4mm

M18 photoelectric sensor diffuse adjustable PNP NPN NO NC NO+NC Sn=0.7/1m

Nanjing KJT Electric Co,.LTD

Our main products are proximity sensor, photoelectric sensor,speed sensor,wireless sensor and so on.

CONTACT US

kjt sensor manufacturer

Copyright © 2019 Nanjing KJT Electric CO.,LTD | All Rights Reserved Design

Chat Online 编辑模式下无法使用

Leave Your Message inputting...

Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.

*Name：

*Phone：

*E-mail：

*Content：