M12*78 Plug in High Pressure Inductive Proximity Sensor equivalent to BES 516-100-S45-S4-D (BHS0001)
General specifications | ||
---|---|---|
Switching function | Normally open (NO) | |
Output type | PNP | |
Rated operating distance | 4 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 3.24 mm | |
Reduction factor rAl | 0.5 | |
Reduction factor rCu | 0.4 | |
Reduction factor r304 | 0.8 | |
Output type | 3-wire | |
Nominal ratings | ||
Operating voltage | 10 ... 30 V | |
Switching frequency | 0 ... 1200 Hz | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | ≤ 3 V | |
Operating current | 0 ... 200 mA | |
Off-state current | 0 ... 0.5 mA typ. 0.1 µA at 25 °C | |
No-load supply current | ≤ 17 mA | |
Switching state indicator | LED, yellow | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN IEC 60947-5-2 | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Mechanical specifications | ||
Connection type | fixed cable with plug | |
Housing material | PBT | |
Sensing face | PBT | |
Degree of protection | IP68 / IP69K | |
Connector | ||
Threading | M12 x 1 | |
Tightening torque | 0.6 Nm | |
Number of pins | 3 | |
Cable | ||
Cable diameter | 3.5 mm ± 0.1 mm | |
Bending radius | > 10 x cable diameter | |
Material | PUR | |
Color | grey | |
Number of cores | 3 | |
Core cross section | 0.14 mm2 | |
Length | 1.5 m | |
Dimensions | ||
Length | 50 mm | |
Diameter | 12 mm | |
Note | use only delivered nuts |
Copyright © 2025 Nanjing KJT Electric CO.,LTD | All Rights Reserved Design
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.