KJT-3030S30-LY Speed Sensors VRS M5Q 5/8-18X3 24" LDS
DESCRIPTION
High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to p
![KJT-LCZ460-LY Speed Sensors 50.8mm,4.5Vdcto26Vdc 1750mm [69 in] Leads](https://img80002753.weyesimg.com/uploads/www.kjt-sensor.com/images/16617397049200.jpg?imageView2/2/w/1920/q/75/format/webp)
