How about the minimum order quantity for ODM products?-KJTDQ Sensor

loading

Be the Best Sensors’ Manufacturer and One Stop Solution Service

Attn:Tara Email:kaijite3@kjtsensor.com WhatsApp:+86 13951751584

Magnetostrictive sensor

How about the minimum order quantity for ODM products?

2019-10-22

Please contact our staff for the exact MOQ of ODM products. Influenced by the upstream supply chain such as packaging materials suppliers and fluctuating price of raw materials and other auxiliary accessories, the MOQ for ODM products may vary a little, but is basically stable throughout the whole year. In addition, the ODM processing requires more labor input, and involves more flexible processes including independent design and development which will take more energy and time. The purpose of deciding MOQ is to ensure what we have done is worthwhile.

Nanjing KJT Electric Co,.LTD is a comprehensively leading manufacturer of capacitive proximity sensor. KJT's main products include conveyor belt safety switches series. The product is very durable. Its roof is made of high composite material, which does not cause obvious wrinkles and breakage when repeatedly folded and stretched. This product can quickly collect data from the surrounding environment. KJTDQ is in the hands of the development, design, sales and service of conveyor belt safety switches. This product has the ability to repeat the same measurement many times.

KJT will always strives for first-rate capacitive proximity sensor. Contact us!

Custom message

Related Products

KJT-3010HTB-LY Speed Sensors M16,25Vp-p,2.69mm 5/8-18 UNF-2A,15.9mm

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (

M30 shielded speed switch 3 wire PNP KJT-KG-JZ-K3 SN 10mm

M8 inductive proximity sensor shielded 10-36VDC PNP NPN NO NC Sn=1mm

M30 inductive proximity sensor shielded AC NO NC long distance

KJT-LCZ460-LY Speed Sensors 50.8mm,4.5Vdcto26Vdc 1750mm [69 in] Leads

The LCZ Series Hall-effect Zero Speed Sensors provide a durable, cost-effective solution in most harsh environments. The sensor is available in 9,5 mm [3/8 in/0.375 in] and 15,9 mm [5/8 in/0.625 in] diameters, in both 50,8 mm [2.00 in] and 76,2 mm [3.00 in] lengths. The stainless steel package is simple to install and adjust. It does not require rotational orientation.

M30 flushed speed switch 2 wire AC/DC KJT-KG-JZ-K5

M8 inductive proximity sensor unshielded 10-36VDC NO NC Sn=2mm IP67

KJT - Wireless sensor limit switch KB-5101

KJT - Wireless limit switch KB-5101

KJTDQ-MA3055S10-LY Speed Sensors VRS 1/4 X 1 450 DEGREE FBTPP 28

High Temperature VRS sensors are designed for use in applications where the sensor is exposed to temperatures up to 260 ºC [450 ºF]. Sealed Front-End versions are available for applications where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs a

M12 high pressure proximity sensor 500bar L=69mm with M12 connector

M8 inductive proximity sensor unshielded DC PNP NPN NO NC connector

KJT-BTL C1 - Profile PA - IO-Link Magnetostrictive linear position sensors in profile housing

KJTDQ KJT-3040AN25-LY Industrial VRS Magnetic Speed Sensors Speed Sensors 15.9mm, M16, 70 Vp-p Round, 4.75mm Pole

Power Output VRS sensors are designed for driving low resistance loads at large air gaps in applications where larger actuators may be used. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine w

M8 Laser photoelectric sensor diffuse type

M12 inductive proximity sensor unshielded NO NC housing with Brass nickel plated

KJT-SHN11.GK13.SC-LY 1-Channel Hall M14 Heavy Duty Speed Sensors

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 … +125°F

KJTDQ EX58H35 -Variable Reluctance Speed (VRS) sensors

The KJT-EX58H35-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX58H35 is specifically designed for use in explosive atmospheres.

M12 inductive proximity sensor unshielded PNP NPN NO NC size M12*45mm

High Quality M12 Inductive Proximity Sensor Connector

KJT-ST series basic photoelectric switch 671/674

KJT-ST series sensor is a basic photoelectric sensor product independently developed and produced, integrating photoelectric conversion circuit, amplification circuit, logic processing circuit and drive output circuit. Compared with similar foreign products, it has the advantage of low price, fast response, high precision and stable quality. It is suitable for robots, automatic production lines, lathes, manipulators and mechanical arm components, food processing equipment, printing equipment and other industrial machinery and equipment.

KJT-E16AM-LY - Variable Reluctance Speed (VRS) sensors VRS Sensor w/M16x1.5 1.5" Thread

The KJT-E16AM-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M18 photoelectric sensor retro reflection PNP NPN NO NC NO+NC Sn=2m adjustable

M30 inductive proximity sensor unshielded PNP/NPN NO NC Sn15mm

KJT-3040AN30-LY Speed Sensors VRS M5K 5/8-18X3.0 MS CONN

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (

Q31 Laser photoelectric sensor through beam type

M12 high pressure proximity sensor shielded PNP NPN NO NC NO+NC Sn=1.5mm

KJT-SHN11.GK13.SD-LY 1-Channel Hall M14 Heavy Duty Speed Sensors

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 … +125°F

KJTDQ-EX34H35-LY - VRS Sensor for use in Explosive Atmospheres w/3/4-20 UNEF-2A 3.5" Thread & 10′ Leads Variable Reluctance Speed (VRS) sensors

The KJT-EX34H35-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply. The EX34H35 is specifically designed for use in explosive atmospheres.

M3 fiber sensor through beam PNP/NPN Sn=1000mm

M3 ultra small inductive proximity sensor shielded long sensing distance

KJT-3090A-LY Speed Sensors Hazard Location VRS 40kHz 78mm

Hazardous Location VRS sensors are designed for use in locations where explosion-proof or intrinsically safe sensors are required. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on

M18 high pressure proximity sensor 500bar L=61mm with M12 connector

M30 high pressure proximity sensor shielded PNP NPN NO NC NO+NC Sn=1.5mm

KJT-SHN11.GK12.E4-LY 1-Channel Hall M14 Heavy Duty Speed Sensors

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -40 … +125°F

KJTDQ-KJT-EX10A-LY - VRS Sensor for use in Explosive Atmospheres w/M10x1 1.3" Thread Variable Reluctance Speed (VRS) sensors

The KJT-EX10A-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

Ring type proximity sensor ring sensor ABS 10-36VDC NPN PNP NO NC Sn=0-17mm

M30 inductive proximity sensor unshielded DC NO NC Sn15mm connector

KJTDQ-TM-HAADA-LY Speed Sensors Transportation and Industrial Speed

KJT's Thrumold Series VRS (Variable Reluctance Speed) sensors are designed to detect engine timing and transmission speed by determining the speed and position of rotating shafts in heavy-duty, off-road, and construction vehicles, providing information to help improve engine combustion process efficiency. These passive VRS sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete cycle occurs as each tooth passes the

M4 Laser photoelectric sensor diffuse type

M30 low temperature proximity sensor shielded PNP NPN NO NC Sn=10mm

KJT-3050S10-LY Speed Sensors 6.4 mm 12V General Purpose

DESCRIPTION General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output sig

M30 capacitive proximity sensor shielded PNP NPN NO NC NO+NC

M8 inductive proximity sensor unshielded DC NO NC Sn=4mm

KJT-SHN10.GN03.E05B-LY 1-Channel Hall M16 Speed Sensors

Kjtdq-Kjt-E58s40-Ly - Vrs Sensor W/5/8-18 Unf-2A 4.0" Thread & 39" Leads Variable Reluctance Speed (VRS) Sensors

The KJT-E58S40-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

FS30 square photoelectric sensor switch diffuse NPN PNP NO NC Sn=0.2/0.3m adjustable

KJT-Laser ranging sensor

0-30m vertical/tilt detection Diffuse reflection detection multiplex output Not affected by color/material or glossiness

KJTDQ-F58A25-LY - Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/ 5/8-18 UNF-2A 2.5" Thread

The KJT-F58A25 series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F58A25 exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

M4 fiber optic sensor diffuse PNP/NPN Sn=40mm stainless steel fiber probe

M6.5 ultra small inductive proximity sensor shielded unthreaded L=18mm

KJTDQ Electrical M12 M8 connector electrical cable connector with cable

M12 M8 connector electrical cable connector with cable

High temperature limit switch XWKC

High Temperature Photoelectric Diffuse Sensor switch

KJT-3050A13-LY Speed Sensors 6.4 mm 12V General Purpose

General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would re

M5 Laser photoelectric sensor diffuse type

Factory Customized IP67 Cable Connector for M12/M18 Sensor

KJT-3050A20-LY Speed Sensors 6.4 mm 12V General Purpose

General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would re

KJT--D12A differential Hall-Effect speed sensor 8-32DVC

Yarn capacitive sensor DU3A NPN PNP NC for textile

KJT-SNG-QPMB-000-LY Speed Sensors Magspeed Quadrature Speed Sensor

KJT's SNG-Q Series Quadrature Speed and Direction Sensors are designed to provide both speed and direction information. Speed information is provided from digital square wave outputs; direction is provided using a quadrature output with signals 90° phase shifted from each other. With the quadrature output, target direction is determined by output lead/lag phase shifting.

M18 Laser photoelectric sensor diffuse type

IEC IP67 standard Limit Switch Sensor Series

KJT-3024-LY Speed Sensors M12, 55Vp-p, .25mm 3/8-24 UNF-2A, 9.5mm

High Resolution VRS sensors are designed for use in applications where precise timing pulse is required, and/or fine pitch gears are used. Proper alignment of the sensor is required. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor’s pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals.

Yarn optical sensor DU17 24VDC NPN PNP NC for textile

PNP No 10-36V M12 High Pressure Proximity Sensor with M12 Connector-

KJTDQ-3025S13-LY Speed Sensors VRS M3Q 3/8-24X1.3 24 LDS

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (

M12 high pressure proximity sensor shielded NO NC NO+NC Sn=1.5mm size M12*47mm

M30 inductive proximity sensor unshielded DC NO NC Sn15mm connector

Kjtdq-F58A40-Ly - Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/ 5/8-18 UNF-2A 4.0" Thread

The KJT-F58A40-LY series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F58A40 exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

Ring shape inductive proximity sensor ABS NPN PNP NO NC Sn=0-12mm IP67 connector m8

Kjt-Btl C1 - Profile PF - Io-Link Magnetostrictive Linear Position Sensors in Profile Housing

Kjt-Btl C1 - Profile PF - Io-Link Magnetostrictive Linear Position Sensors in Profile Housing

KJTDQ-KJT-E58S-LY - VRS Sensor w/5/8-18 UNF-2A 2.0" Thread & 39" Leads Variable Reluctance Speed (VRS) sensors

The KJT-E58S-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M8*45mm inductive proximity sensor shielded AC NO NC Sn=2mm IP67

KJT-SNG-SPRC-001-LY Speed Sensors HALL SENSOR,RIGHT ANGLE, 46MM

GENERAL SPECIFICATIONS KJT's SNG-S Series Speed Sensors use a magnetically biased Hall-effect integrated circuit (IC) to accurately sense movement of ferrous metal targets. The specially designed IC and a permanent magnet are sealed in rugged, probetype packages. The IC detects the alteration of the magnet's flux density when it is approached by ferrous metal. A sensor positioned at the circumference of a revolving gear wheel detects the teeth and spaces, and supplies a digital pulse output with frequency proportional to gear wheel speed. Optimum performance is dependent upon a combination of variables such as target material, geometry and speed, sensor/ target gap, and environmental temperature.

M18 capacitive proximity sensor shielded PNP NPN NO NC NO+NC

M30 high temperature proximity sensor shielded AC NO NC Sn=10mm IP67

KJT-MA3055-LY Speed Sensors VRS 1/4X.7 450F BTTP 28GA LDS

High Temperature VRS sensors are designed for use in applications where the sensor is exposed to temperatures up to 260 ºC [450 ºF]. Sealed Front-End versions are available for applications where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs a

High temperature limit switch XWKB

M4 ultra small inductive proximity sensor shielded long sensing distance

KJTDQ-F12S-LY Hall Effect Zero-Speed Sensor Square Wave Signal Output from NPN w/M12x1 2.0" Thread & 39" Leads

The KJT-F12S-LY series Hall-Effect Zero-Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The F12S exhibits a static function, whereby pulse generation down to 0 Hz is guaranteed. The sensor function is independent of the rotational mounting angle.

M18 laser sensor diffuse PNP NPN NO NC NO+nc Sn=300mm adjustable

KJT-SHN9.GK00.K2-LY 1-Channel Hall M14 Light Duty Speed Sensors

1-Channel Hall M14 Light Duty series Data summary: Power supply 8 VDC ... 36 VDC Frequency range 0 Hz ... 15 kHz Operation temperature -13 °F ... +185 °F Degree of protection / EN 60529 IP65 Applications: Speed detection of gearwheels with small module and high resolution Š Applications in machine and plant construction Features: Detection from 0 Hz No alignment required Installation dimension DIN M14

M12 capacitive proximity sensor Unshielded PNP NPN NO NC Sn=1-6mm

M30 low temperature proximity sensor shielded NO NC connector IP67

KJT-3030AN-LY Speed Sensors High Output VRS 15kHz 56mm

High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor’s pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak

M3 fiber optic sensor diffuse PNP/NPN Sn=0-60mm stainless steel optical sensors

KJT - BTL C1 - Profile PF - Analog Magnetostrictive linear position sensors in profile housing

High resolution of up to 0.5 µm Measuring lengths of up to 7620 mm Measures several positions and speeds at the same time Non-contacting, thus free from wear – no downtimes and a long service life Easy integration with equipment through a variety of interfaces – such as IO-Link, Profinet, EtherCAT, SSI, and analogously programmable output signals – in order to invert, configure, and document the measurement range Three housing variants for flexible and fast installation depending on the space requirements and application Floating and captive encoders

KJT-E16A25-LY - VRS Sensor w/M16x1.5 2.5" Thread

The KJT-E16A25-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

M12 inductive proximity sensor unshielded AC NO NC Sn=4mm IP67

KJT-3015A35-LY Speed Sensors VRS M3L 3/8-24X3.5 24 LDS

General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would re

M4 optical fiber sensor diffuse PNP/NPN Sn=0-60mm stainless steel

KJT-SHP7.GP00.SC-LY 1-Channel Hall M18 Brass Speed Sensors

KJT-SHP7.GP00.SC-LY 1-Channel Hall M18 Brass Speed Sensors

KJT-D12A-LY - Differential Hall Effect Speed Sensor - Square Wave Signal Output from Push-Pull Stage w/M12x1 1.0" Thread D12A speed sensor

The KJT-D12A-LY series Differential Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. The D12A exhibits a static function, whereby pulse generation down to 5 Hz is guaranteed. D12A speed sensor

M30 high temperature proximity sensor unshielded PNP NPN NO NC -25℃-+150℃

KJTDQ-3045A-LY VRS Speed Sensors 15.9 mm 300V High Resolution

High Resolution VRS sensors are designed for use in applications where precise timing pulse is required, and/or fine pitch gears are used. Proper alignment of the sensor is required. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals.

FSU30 trough type photoelectric sensor through beam NPN PNP NO NC Sn=30mm

KJT-3030S30-LY Speed Sensors VRS M5Q 5/8-18X3 24" LDS

DESCRIPTION High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to p

M12 high pressure proximity sensor shielded with M12 connector 500bar

M6.5 ultra small inductive proximity sensor shielded unthreaded PNP NPN NO NC

KJTDQ-KJT-EX12A35-LY - VRS Sensor for use in Explosive Atmospheres w/M12x1 3.5" Thread Variable Reluctance Speed (VRS) sensors

The KJT-EX12A35-LY series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.

Nanjing KJT Electric Co,.LTD

Our main products are proximity sensor, photoelectric sensor,speed sensor,wireless sensor and so on.

CONTACT US

kjt sensor manufacturer

Copyright © 2019 Nanjing KJT Electric CO.,LTD | All Rights Reserved Design

Chat Online 编辑模式下无法使用

Leave Your Message inputting...

Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.

*Name：

*Phone：

*E-mail：

*Content：